Accurist 6P20 Instructions Manual page 18

17
17
Note: Make sure you have correctly set AM/PM before setting the time.
When the day changes over, it is a.m..
(Day changes over between 0:00a.m. and 5:30a.m. or little later)
Check am./p.m. by the 24hour hand.
Setting the Date (By quick operation)
Pull the crown out to the 1st position. Turn the crown counterclockwise to set
the date quickly.
Note: Do not set the date between the hours 9:00p.m. and 0:30a.m.. The date
may not change correctly the next day.
Continued...