1. Manuals
  2. Brands
  3. Accurist Manuals
  4. Watch
  5. Calibre CP00
  6. Setting instructions manual

Accurist CP00 Setting Instructions Manual

Chronograph watch
Hide thumbs Also See for CP00:
Table of Contents

Advertisement

Quick Links

PURCHASED FROM
DATE OF PURCHASE
MODEL NO
OWNERS NAME
Accurist Helpline
020 7447 3945
ADDRESS
Further information or instructions can be obtained
Chronograph Watch Setting Instructions
from the Accurist Helpline during office hours Monday to Friday.
Including CP00, 0S60, 0S10, 0S20, FS20,
0S22, 0S90, JS00, FS00, FS80 & YM62A

Advertisement

Table of Contents
loading

Related Manuals for Accurist CP00

Summary of Contents for Accurist CP00

  • Page 1 Accurist Helpline 020 7447 3945 ADDRESS Further information or instructions can be obtained Chronograph Watch Setting Instructions from the Accurist Helpline during office hours Monday to Friday. Including CP00, 0S60, 0S10, 0S20, FS20, 0S22, 0S90, JS00, FS00, FS80 & YM62A...
  • Page 2 Accurist Watches Limited Asher House Blackburn Road West Hampstead London, NW6 1AW Telephone: +44 (0)20 7447 3900 Fax: +44 (0)20 7447 3949 Email: service@accurist.co.uk For latest information please check our websites: www.accurist.co.uk & www.britishrealtime.com Published July 2009...

  • Page 3: Table Of Contents

    Contents How to use these instructions The BritishRealTime Project • www.britishrealtime.com CP00 Multi Function Operating Instructions 0S60 & 0S10 Chronograph Operating Instructions 0S20 Chronograph Operating Instructions Using the Slide Rule Bezel FS20 Chronograph Operating Instructions 0S22 Chronograph Operating Instructions 0S90 Chronograph Operating Instructions...
  • Page 4 Care of your watch WEEE Directive Bracelet Adjustment International Service Agents Resistance to water Accurist Quartz Guarantee After Sales Service Payment & Postage Instructions...
  • Page 5 Caseback markings MB 119 Model Number CAL 0T10 Calibre Number SR927W Battery Number...

  • Page 6: How To Use These Instructions

    How to use these instructions This booklet contains setting instructions for the Accurist Quartz Analogue series of watches. Each section describes a particular calibre (also called watch movement) which offers a unique set of functions and features. As such, it is necessary to identify the correct calibre of your watch before proceeding to the appropriate section (see diagram opposite).

  • Page 7: The Britishrealtime Project • Www.britishrealtime.com

    The BritishRealTime Project • www.britishrealtime.com The BritishRealTime clock has been designed and developed to replace our sponsorship of the British Telecom speaking clock. Having been sponsors of the speaking clock for over 22 years and having received 3.5 billion calls we felt that it was time for a change.
  • Page 8 Filming started in September 2008 at The International Jewellery Fair, London and since then over 6,000 people have been filmed across the country including Lakeside, Cardiff, Sheffield, Glasgow, Gateshead, Dudley, Manchester, and Croydon. Filming will continue well into 2009 as the clock continues to grow incorporating more and more faces of the real British public to create BritishRealTime.

  • Page 9: Cp00 Multi Function Operating Instructions

    CP00 Operating Instructions KEY TO DIAGRAM UTC dial - shows universal coordinated time (UTC) (Multi Function) in 24 hour format. UTC (or GMT) is the standard from which all time zones are calculated. 24 hour dial - shows main hand time in 24 hour UTC Dial format.
  • Page 10 To set the time: 1. Push the bottom right hand button until the mode hand indicator points to TME. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position. 3.
  • Page 11 CP00 Operating Instructions continued . . . To set the time continued . . . 6. Press the upper right button. You will see the minutes flashing. Press the lower left button to set the minutes to your current time.
  • Page 12 To set the calendar: 1. Push the bottom right hand button until the mode hand indicator points to CAL. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position. 3.
  • Page 13 CP00 Operating Instructions continued . . . To set the alarms 1. Push the bottom right hand button until the mode hand indicator points to AL1, AL2 or AL3. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position.
  • Page 14 Using the timer 1. Press the lower right button to move the mode hand indicator to TMR mode on the mode dial. 2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position. 3.
  • Page 15 CP00 Operating Instructions continued . . . To set the time zone 1. Setting the time zones allows you to add or remove cities on the digital display or switch between daylight saving and standard time. Begin by pressing the lower right button to move the mode hand indicator to SET mode on the bottom dial.
  • Page 16 Troubleshooting The analogue hands block the digital display. 1. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position allowing a clear view of the digital display. 2. Press the upper left button to return the analogue hands to the previous position. The analogue time does not match the digital time for the selected zone.
  • Page 17 CP00 Operating Instructions continued . . . Troubleshooting continued . . . The analogue hands are not precisely synchronised with the digital time. 1. Press the lower right button to move the mode indicator hand to CHR. 2. Pull the lower right button out one click. The hour, minute and UTC hands will retract towards the straight up 12 O’clock position.
  • Page 18 4. Press the upper left button. You will see HR on the top half of the digital display. Press the upper right button to advance the hour and 24-hour hand clockwise until they both point straight up at the 24-hour position. Use the lower left button to move the hand anti-clockwise until it is pointing straight up at the 12 O’clock position.
  • Page 19 CP00 Operating Instructions continued . . . Troubleshooting continued . . . The watch malfunctions in some way and the above procedures do not work. 1. Press the lower right button until the mode indicator hand points to TME. 2. Pull the lower right button out one click. Press the other three buttons down simultaneously for three seconds and release.
  • Page 20 1. CDROM giving step-by-step interactive instructions is supplied with the watch. Interactive instructions are also available from our website www.accurist.co.uk. 2. Technical manual in A4 printable Adobe Reader format available from our website www.accurist.co.uk. 3. Accurist technical help line +44 (0)20 74473945 – during office hours.

  • Page 21: 0S60 & 0S10 Chronograph Operating Instructions

    0S60, 0S10 Operating Instructions (Chronograph) Dial A (minute dial) Top Right (TR) Date window Dial C (hour dial) Position A Position B Position C Bottom Right (BR) Dial B (seconds dial)
  • Page 22 To set the time: 1. Gently pull out crown to position C. 2. Turn crown either way to correct time. 3. Push in crown to position A. To set your watch accurately visit www.britishrealtime.com To set the date: 1. Gently pull out crown to position B. 2.
  • Page 23 0S60, 0S10 Operating Instructions continued . . . 3. Press BR Button to reset the chronograph. 4. When you have finished with the Chronograph function, press BR Button again; this re-starts the small second hand on Dial B. Note: After 30 seconds the Second hand on Dial B will stop at the zero position, however, the time is still continuing to be measured in seconds and when TR Button is pressed to stop the timing, the second hands will automatically move to show the time.
  • Page 24 Chronograph zero set: This procedure is only necessary when the battery is replaced, or when the Chronograph hands do not return to the ‘0’ position, when the Chronograph mode is selected. 1. Gently pull out crown to position C 2. Push TR Button to advance the sweep second hand to the 12 0’clock position. Please note each push of the TR Button will advance the hand 1 second.

  • Page 25: 0S20 Chronograph Operating Instructions

    0S20 Operating Instructions (Chronograph) Top Right (TR) Chronograph minute counterhand Position A Position B Position C Small second dial Bottom Right (BR) 24 hour dial...
  • Page 26 For timing events up to 1 hour 1. To start chronograph press button TR. 2. To stop chronograph press button TR. 3. To return hand to zero position press button BR. Troubleshooting - If your watch receives a knock and the second hand is not on zero: 1.

  • Page 27: Using The Slide Rule Bezel

    Using the Slide Rule Bezel Flying distance and other navigation calculations as well as general calculations can be performed using the slide rule bezel located around the outside of the dial. This slide rule bezel is not able to display decimal places for calculation results, and should only be used as a general reference as an alternative to more accurate calculations.
  • Page 28 Inside scale Outside scale...
  • Page 29 A. Navigation Calculator 1. Calculation of time required Problem: How long does it take an airplane flying 180 knots to fly a distance of 450 nautical miles? Solution: Set the 18 mark on the outside scale to the SPEED INDEX ( ).
  • Page 31 2. Speed (Ground Speed) Calculation Problem: What is the speed (ground speed) of an airplane when it takes 1 hour and 20 minutes to fly a distance of 240 nautical miles? Solution: Align the 24 on the outside scale with 1:20 (80) on the inside scale. At this time, 18 is aligned with the SPEED INDEX ( ) on the inside scale, and the answer is 180Kt.
  • Page 33 3. Flying distance calculation Problem: What is the flying distance travelled in 40 minutes at a speed of 210 knots? Solution: Align the 21 on the outside scale with the SPEED INDEX ( ) of the the inside scale. The 40 of the inside scale is now pointing to 14 and the answer is 140 nautical miles.
  • Page 35 4. Fuel consumption rate calculation Problem: If 120 gallons of fuel are consumed in 30 minutes’ flying time, what is the fuel consumption rate? Solution: Align the 12 of the outside scale with the 30 of the inside scale. The SPEED INDEX ( ) now points to 24 and the answer is 240 gallons per hour.
  • Page 37 5. Fuel consumption calculation Problem: How much fuel is consumed in 6 hours at a fuel consumption rate of 250 gallons per hour? Solution: Align the 25 of the outside scale with the inside scale’s SPEED INDEX ( ) of the inside scale. The 6:00 is aligned with 15 and the answer is 1500 gallons.
  • Page 39 6. Maximum flying hours Problem: With a fuel consumption rate of 220 gallons per hour and a fuel supply of 550 gallons, what is the maximum number of flying hours? Solution: Align the 22 of the outside scale with the inside scale’s SPEED INDEX ( ).
  • Page 41 B. General calculation functions 1. Multiplication Problem: 20 x 15 Solution: Align 20 on the outside scale with 10 on the inside scale and read the outside mark which is aligned with 15 of the inside scale. Figure the number of decimal places and the answer is 300.
  • Page 43 2. Division Problem: 250/20 Solution: Align 25 on the outside scale with 20 on the inside scale. On the outside scale read the 12.5 mark that is aligned with 10 on the inside scale. Figure the number of decimal places and the answer is 12.5...
  • Page 45 3. Reading ratios Problem: 30/20 = 60/x Solution: Align 30 on the outside scale with 20 on the inside scale. At this time, the answer of 40 can be read from the inside scale corresponding to 60 on the outside scale. In addition, the ratio of the value on the outside scale to the value on the inside scale is 30:20 at all positions on the scale.

  • Page 47: Fs20 Chronograph Operating Instructions

    FS20 Operating Instructions (Chronograph) To set the time: 1. Gently pull out crown to position C. chronograph 24 hour hand 2. Turn crown either way to correct time. minute hand 3. Push in crown to position A. top right (TR) To set your watch accurately visit www.britishrealtime.com To set the date:...
  • Page 48 Using the chronograph: Chronograph zero set: This procedure is only necessary when 1. Press TR Button to start and stop the the battery is replaced, or when the chronograph. Chronograph hands do not return to the 2. Press BR Button to reset the 12 o’clock (‘0’) position.

  • Page 49: 0S22 Chronograph Operating Instructions

    0S22 Operating Instructions (Chronograph) Minute hand chronograph second hand Button A 24 hour hand hour hand 1st click position chronograph minute hand 2nd click position Normal crown position Button B Calendar Second hand or 1/20 sec chronograph hand...
  • Page 50 To set the time: To set the date: 1. Pull the crown out to the 2nd 1. Pull the crown out to the 1st Click position so that the second hand stops Position. at ZERO position. 2. Turn the crown anticlockwise to set the 2.
  • Page 51 0S22 Operating instructions continued . . . Using the Chronograph: This chronograph is able to measure and display time in 1/20(1/1) second united up to maximum of 59 min 59 sec. The retrograde chronograph 1/20(1/1) second hand keeps continuously for 60 seconds after starting, and then stops at ZERO position.
  • Page 52 3. Pressing button "B" resets the chronograph and all hands return to their ZERO positions. *Moving of the retrograde chronograph is a demo. Actual measurement will be shown when retrograde demo stopped / STOP button is pushed.
  • Page 53 0S22 Operating instructions continued . . . CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure should be performed when the chronograph second hand and chronograph 1/20(1/1) second hand do not return to the ZERO second position after the chronograph has been reset, and including after the battery has been replaced.
  • Page 54 5. Press button "B" to check that the chronograph hands are reset to the ZERO position. * Do not return crown to the normal position while chronograph second hand and 1/20 chronograph second hand return to ZERO position. Each hand stops on the way when crown is returned to normal position and these positions are recognized as ZERO position.

  • Page 55: 0S90 Chronograph Operating Instructions

    0S90 Operating Instructions (Chronograph)
  • Page 56 To set the time: To set the date: 1. Pull the crown out to the 2nd 1. Pull the crown out to the 1st position. position. 2. Turn the crown counter-clockwise to set 2. Turn the crown to set hour and the date.
  • Page 57 0S90 Operating instructions continued . . . Using the Chronograph: The chronograph is able to measure and display time in 1/100 second united up to maximum of 59 minutes 59 seconds. • The chronograph 1/100 second hand moves for 61 seconds after measurement is started, after which time it will stop at 0 position.
  • Page 58 To stop the chronograph: • Press button A. • When the measured time is less than 61 seconds, the chronograph minute, second and 1/100 second hands will stop at the measured time. • When the measured time is over 61 seconds, the chronograph minute and second hands will stop at measured time.
  • Page 59 0S90 Operating instructions continued . . .
  • Page 61 0S90 Operating instructions continued . . . CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure should be performed when the chronograph 1/100 second hand and the chronograph second hand do not return to zero position after the chronograph has been reset, and including after the battery has been replaced. 1.
  • Page 62 4. Once the hands have been zeroed, return the crown to the normal position. * Do not push the crown to the normal position while the chronograph 1/100 second hand and the chronograph second hand return to zero position. Each hand stops on the way when crown is returned to the normal position and these positions are recognized as zero position.

  • Page 63: Js00 Chronograph Operating Instructions

    JS00 Operating Instructions (Chronograph)
  • Page 64 To set the time: Chronograph zero set: This procedure is only necessary when the 1. Gently pull out the crown to position B. battery is replaced, or when the chronograph 2. Turn the crown either way to correct hands do not return to the 12 o’clock time.

  • Page 65: Fs00 Chronograph Operating Instructions

    FS00 Operating Instructions (Chronograph)
  • Page 66 SETTING THE TIME 1. Pull the crown out to the 2nd-click position so that the second hand stops at (0) position. 2. Turn the crown to set the hour and minute hands. To set your watch accurately visit www.britishrealtime.com SETTING THE DATE 1.
  • Page 67 FS00 Operating instructions continued . . . SETTING THE CHRONOGRAPH This chronograph is able to measure and display time in 1 second intervals up to a maximum of 1 hour. Measuring time with the chronograph 1. The chronograph can be started and stopped each time button TR is pressed. 2.
  • Page 68 CHRONOGRAPH RESET (Including after replacing battery) This procedure should be performed when the chronograph second hand does not return to the 0 second position after the chronograph has been reset, and including after the battery has been replaced. 1. Pull the crown out to the second position. 2.

  • Page 69: Fs80 Chronograph Operating Instructions

    FS80 Operating Instructions (Chronograph)
  • Page 70 To set the time: 1. Gently pull out the crown to position C. moving the hands to a time other than between the above times. 2. Turn the crown either way to correct time. * The date is based on a 31 day calendar. The date 3.
  • Page 71 FS80 Operating instructions continued . . . Setting the day: Using the chronograph: When using the chronograph begin timing 1. Gently pull out the crown to position B. after first making sure that the chronograph 2. Turn the crown anti-clockwise to set minute hand has returned to the 00 minutes the date.
  • Page 72 Chronograph Timing: This chronograph measures and displays time up to 30 minutes in 1 second units. Each of the chronograph hands stop when 30 minutes has elapsed. Timing procedure: 1. Press button A to start timing. * The chronograph is repeatedly started and stopped each time button A is pressed. 2.
  • Page 73 FS80 Operating instructions continued . . . Note: Do not subject the watch to strong impacts during chronograph timing. If the watch is subjected to a strong impact during chronograph timing or after it has stopped after 30 minutes have elapsed, the chrongraph minute hand may shift position. If this happens, use the chrongraph after first resetting by pressing button B.
  • Page 74 Chronograph Hand Zero Positioning: 1. Pull the crown out to position C. 2. Press button A to position the chronograph second at the 0 position. * The chronograph second hand can be advanced by rapidly pressing button A continuously. 3. Once the chronograph second hand has been positioned at the 0 position, reset the time and return the crown to the normal position.

  • Page 75: Ym62A Chronograph Operating Instructions

    YM62A Operating Instructions...
  • Page 76 Setting the time and date: 1. Pull the crown out to the 1st position. 2. Turn the crown clockwise until the previous day’s date appears. Note: Do not set the date between 9:00 PM and 1:00 AM. Otherwise, the date may not change properly. 3.
  • Page 77 YM62A Operating Instructions continued . . . Recommend: • The hands be set to the time a few minutes ahead of thecurrent time, taking into consideration the time required to set the Alarm hands and to adjust the Stopwatch hands position if necessary. •...
  • Page 78 1. Pull the crown out to 1st. click position. 2.• Press button “B” repeatedly to set the Alarm hands to the desired alarm time. Note: The Alarm hands move quickly if button "B" is kept pressed. 3. Push crown back to normal position. Note: The alarm is automatically engaged. The single-time alarm cannot be set for a time more than 12 hours ahead of the current time.
  • Page 79 YM62A Operating Instructions continued . . . How to stop the alarm: At the designated time the alarm rings for 20 seconds, and it is automatically disengaged as it stops. To stop it manually, press any button. • While the stopwatch is measuring, the alarm rings differently than usual. However, this is not a malfunction.
  • Page 80 How to use stopwatch function: The stopwatch can measure up to 59' 59" 8 in 1/5 second increments. After 60 minutes, it will start to counting again from "0" repeatedly up to 12 hours. When the measurement reaches 12 hours, the stopwatch automatically stops counting.
  • Page 81 YM62A Operating Instructions continued . . .
  • Page 82 1. Stopwatch 1/5-second hand is capable of timing 12 hours. (60 seconds x 720 times) 2. Stopwatch minute hand is capable of timing 12 hours. (60 minutes x 12 times) * Before using the stopwatch, be sure to check that the crown is set at the normal position and that the Stopwatch hands are reset to the "0"...
  • Page 83 YM62A Operating Instructions continued . . . Alarm Hand and Stopwatch Hand Position Adjustment Set the Alarm hands to the time the main time hands indicate. Before using the alarm, check that the Alarm hands are adjusted. If the Stopwatch hands are not in “0” position, follow the procedures below to set them to “0”...
  • Page 84 2. Press button “B” repeatedly to set Alarm hands to the time the main time hands indicate. Note: The Alarm hands move quickly if button "B" is kept pressed. 3. Press button “A” for 2 seconds. Stopwatch minute hand turns a full round and can now be set to correct position.
  • Page 85 YM62A Operating Instructions continued . . . * Alarm hands * Stopwatch minute * Stopwatch 1/5-second advance 12 hours. hand turns a full round. hand turns a full round. Alarm hands and Stopwatch hands can be readjusted in the following order by pressing button "A" for 2 seconds..
  • Page 86 For Electro-Luminescent Models Electro-Luminescent is state-of-the-art technology which allows you to read your watch under any lighting conditions. To operate depress the Electro-Luminescent Button. Note: The battery life will be affected by the number of times the E L display is operated;...

  • Page 87: Care Of Your Watch

    Care of your watch Avoid temperature extremes 1. Avoid leaving your watch in direct sunlight or in extremely warm conditions for long periods of time: this will cause malfunctioning and shorten the life of the battery. 2. Do not leave your watch for long periods of time in extremely cold places; this may cause your watch to gain or lose time.
  • Page 88 Avoid strong shocks 1. This watch will withstand the bumps and jars normally incurred during sports activities. 2. Avoid dropping your watch on the ground or otherwise imparting severe shock to it. Avoid strong magnetic fields 1. Keep your watch away from strong magnets. 2.
  • Page 89 2. Avoid materials such as gasoline, benzene, paint thinner, alcohol, spray cosmetics, nail polish, nail polish remover, adhesives or paint. Periodic inspection 1. A regular 4 to 5 years service by an authorised Accurist technician will ensure trouble free operation. 2. Refer to the After Sales Service section for details.
  • Page 90 IMPORTANT 1. Keep the batteries out of reach of infants and small children. Should accidental ingestion occur consult a doctor immediately. 2. Do not attempt to replace the battery yourself as this invalidates your guarantee. Keep you watch clean Wipe off any moisture that adheres to the case, glass or band with a soft, clean cloth.

  • Page 91: Weee Directive

    WEEE Directive The crossed-out wheeled bin indicates that used electrical and electronic equipment should not be mixed with general domestic waste. There is a separate collection point for these products. The objectives of the Community’s environment policy are, in particular, to preserve, protect and improve the quality of the environment, protect human health and utilise natural resources prudently and rationally.
  • Page 92 EU states may return their used electrical and electronic equipment to designated collection points free of charge. Equally return your product to an Accurist stockist or Accurist headquarters, who will see to the product’s disposal. Please contact your authority for further details.
  • Page 93 Disposal information for business users EU Countries Please contact your Accurist dealer who will inform you about the ‘take back’ of products. Non EU Countries If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

  • Page 94: Bracelet Adjustment

    Bracelet Adjustment The bracelet requires a small adjustment and the model has a Z-type clasp. 1. Depress the end of the spring bar on the centre clasp with a pin. 2. Relocate the spring bar in an alternative hole.
  • Page 95 The bracelet requires a significant adjustment or the model does not have a Z-type clasp. 1. Use the enclosed wrist gauge to measure and mark the size of your wrist. 2. Return the completed wrist gauge with your watch. 3. Follow the instructions in the After Sales Service section to return your watch for adjustment.

  • Page 96: International Service Agents

    International Service Agents International Service Headquarters Accurist Watches Limited, Asher House, Blackburn Road, West Hampstead, London, NW6 1AW Tel: +44 (0)20 7447 3945, Fax: +44 (0)20 7447 3946 United Arab Emirates Al Abbas, P.O. Box 45999, Dubai, UAE Tel: 00971 4 351 2440, Fax: 009714 351 2450...
  • Page 97 Netherlands Sabre Nederland B.V., Ellermanstraat 23, 1099 BX Amsterdam, The Netherlands Tel: 0031 20 692 8888, Fax: 0031 20 665 2184 Switzerland Nimex AG, Raffelstr 11, CH - 8045, Zurich, Switzerland Tel: 0041 44 462 91 91, Fax: 0041 44 462 91 81 Norway Thune, Nils Hansensvei 2, N - 0667 Oslo, Norway Tel: 0047 22 70 08 40, Fax: 0047 22 70 08 41...
  • Page 98 Kingdom of Saudi Arabia Al Asasyah, Sitteen Street, P.O. Box 19248 - 19249, Jeddah 21435 Tel: 00966 672 6826, Fax: 00966 676 2262 N. Antilles J Best Jeweler, 2 Front Street, Philipsburg, St. Maarten, N. Antilles Tel: + 599 542 2294, Fax: + 599 542 1351, US Toll Free 1 877 J IS BEST Cyprus A Chrysanthou Ltd, 35 Kappadokias Street, Strovolos 2028 Tel: 00357 22 512 122, Fax: 00357 22 512 880...

  • Page 99: Resistance To Water

    Resistance to water INDICATIONS ON DIAL OR CASEBACK LIGHT SPRAY, DIAL CASEBACK PERSPIRATION, SWIMMING LIGHT RAIN ETC... BATHING, ETC... WATER RESISTANT WATER RESISTANT WATER RESISTANT 50M (5 ATM) WATER RESISTANT WATER RESISTANT 100M (10 ATM) WATER RESISTANT WATER RESISTANT 150M (15 ATM) AND DEEPER...
  • Page 100 DIVING: SKIN DIVING: SCUBA DIVING: WHEN USING A DIVING WITHOUT DIVING WITH HELIUM ENRICHED AN AIR TANK AN AIR TANK ENVIRONMENT...
  • Page 101 Resistance to water IMPORTANT - NEVER PULL OUT THE CROWN WHEN THE WATCH IS WET. • Tighten screwlock crown completely. • Water resistance is not a permanent property. We strongly recommend you return your watch for resealing every 4 - 5 years and/or when changing batteries.

  • Page 102: Accurist Quartz Guarantee

    The terms of this guarantee provide rights that are in addition to your statutory rights and do not in any way limit or otherwise affect those statutory rights. Your Accurist watch is guaranteed for 3 years from the date of original retail purchase against any malfunction of the watch movement due to defective materials or workmanship.
  • Page 103 We will, at our option, repair or replace your watch with a model of similar appearance or value. After the expiry of this guarantee the Accurist Service Centre and International Service Agents are at your complete disposal. We will be pleased to quote for routine maintenance, oiling or repair of your watch by our factory trained staff of experts.

  • Page 104: After Sales Service

    After Sales Service Each Accurist watch comes with a lifetime commitment to quality after sales service. Our award winning customer service team are dedicated to providing expert servicing from bracelet adjustments to full overhaul. We pride ourselves in identifying our customer's requirements and reacting to their individual needs.

  • Page 105: Payment & Postage Instructions

    Accurist Service Centre address listed on page 94. 3. Enclose a cheque, postal order or MasterCard/Visa payment for £5.00 payable to Accurist Service Centre. This covers return postage and insurance for loss or damage whilst in transit or undergoing repairs. No liability for loss or damage will be accepted without this remittance.
  • Page 106 I enclose: cheque postal order credit card, debit card (issue no. ) payment for £5.00 For all other countries Card No: 1. Return the watch with payment to your nearest International service agent (see page 94). Expires: * CSC number: 2.

This manual is also suitable for:

0s600s100s20Fs200s220s90 ... Show all

Table of Contents