Accurist 6P20 Instructions Manual page 17

16
Setting the day:
1. Pull the crown to the 2nd position to stop the second hand at 0 (12 o'clock).
2. Turn the hour/minute hands in a clockwise direction to set a day
In order to set the day, you must advance the hour hand by 24 hours per day.
Note: Do not set the day by turning the crown in counterclockwise direction.
The day changes somewhere between 0:00a.m. and 5:30a.m. or a little later.
Setting the Time:
After setting the day, set the hour (and 24hour) and minute hands.
1. Turn the hour/minute hands in a clockwise direction to set the time.
2. To ensure time is set accurately, first turn the minute hand 5 minutes ahead
of desired time and then turn back (in a counterclockwise) to the desired time.