Double Section Assembly - Blodgett DFG-100 XCEL Installation And Operation Manual

Installation
oven Assembly

DoUBLE SECtion ASSEMBLY

1. Secure the short legs to the bottom sections as de-
scribed.
2. Attach lower flue box to lower oven.
3. Place the upper section in position on top of the lower
oven.
4. Attach the stacking brackets using the remaining
5/16" bolts shipped with the ovens.
5. Install flue riser and attach upper flue box to upper
oven.
WARninG!!
When stacking ovens be sure to remove the
single oven flue boxes prior to attaching up-
per and lower boxes and riser.
ovEn LEvELinG
After assembly, the oven should be leveled and moved to
the operating location.
1. The oven can be leveled by adjusting the feet or cast-
ers located on the bottom of each leg.
Figure 6
6
Flue
Boxes
Flue Riser