Arturia Microbrute User Manual page 10

NOTICE
Use only the provided AC adapter, as specified by ARTURIA.
•
Read and understand all the instructions.
•
Always follow the instructions on the instrument.
•
The manufacturer's warranty does not cover service charges incurred due to a lack of
knowledge relating to how a function or feature works (when the unit is operating as
designed); reading the manual is the owner's responsibility. Please study this manual
carefully and consult your dealer before requesting service.
PRECAUTIONS INCLUDE, BUT ARE NOT LIMITED TO, THE FOLLOWING:
Before cleaning the instrument, always remove the electrical plug from the outlet,
•
as well as the USB cable. When cleaning, use a soft and dry cloth. Do not use
gasoline, alcohol, acetone, turpentine or any other organic solutions; do not use
liquid cleaner, spray or cloth that's too wet.
Do not use the instrument near water or moisture, such as a bathtub, sink,
•
swimming pool or similar place.
Do not place the instrument in an unstable position where it might accidentally
•
fall over.
Do not place heavy objects on the instrument. Do not block openings or vents of
•
the instrument; these locations are used for ventilation to prevent the instrument
from overheating.
Do not place the instrument near a heat vent or any place of poor air circulation.
•
Make sure the line voltage in your location matches the input voltage specified
•
on the AC power adapter.
Do not open and insert anything into the instrument, as this could cause a fire or
•
electrical shock.
Do not spill any kind of liquid onto the instrument.
•
In the event of a malfunction, always take the instrument to a qualified service
•
center. You will invalidate your warranty if you open and remove the cover, and
improper testing may cause electrical shock or other malfunctions.
Do not use the instrument when thunder and lightning is present.
•
Do not expose the instrument to hot sunlight.
•
Do not use the instrument when there is a gas leak nearby.
•
ARTURIA is not responsible for any damage or data loss caused by improper
•
operations to the instrument.
ARTURIA recommends the use of shielded and less than 3 meters long cables
•
for Audio, and ferrite equipped CV/Gate and USB cables.
Arturia Microbrute User's Manual 10