To Use The Menu; Using The Picture Menu - Hisense TV User Manual

To Use the Menu

1
Press [MENU] to open the main menu.
2
Press [▲/ ] to select a menu option, then press [ /
ENTER] button to enter the menu.
3
In each menu, you can:
Press [▲/ ] to select an item,
Press [ / ] to adjust the value, or
Press [ /ENTER] to enter the submenu,
Press [MENU] to back the previous menu.
4
Press [EXIT] to exit the menu.
NOTE
The menus in the user manual may vary slightly from the actual screen.

Using the Picture Menu

Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
Enter Select
ENTER
Adjust settings to affect picture quality
You can adjust:
Picture Mode - Adjust the Picture Mode. You can select
Vivid, Standard, Theater, Energy Savings or Custom.
Brightness - Increase or decrease the brightness of the
picture. Increasing the brightness can add more light to dark
areas of the picture, while decreasing the brightness can
add more darkness to light areas of the picture.
Contrast - Increase or decrease the contrast of the picture.
Increase the contrast to adjust the white areas of the picture
or decrease the contrast to adjust the black areas of the
picture.
Color - Adjusts the color intensity of the picture. A low
setting may make the color look faded. A high setting may
make the color look artificial.
Tint - Adjusts the color balance of the picture.Use this
control to make skin tones look more natural.
Sharpness - You can increase the sharpness level for clearer
images or decrease the sharpness level for smoother images.
Advanced Video - Access advanced video settings such as
Backlight, Color Temperature and Noise Reduction.
Basic Features
Standard
50
50
50
0
50
Previous Exit
MENU EXIT
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
Enter
ENTER
Adjust settings to affect picture quality
Dynamic Backlight Control: Enhances the contrast
ratio between light and dark areas of the picture. You can
select Off, Low, or High.
Backlight: Sets the overall brilliance of the screen. When
the option of Dynamic Backlight Control is turned Low
or High, you cannot change the Back Light setting.
Aspect Ratio: To choose the screen aspect ration from
Wide, Cinema, Auto, Normal, 1:1 PIXEL MAP and Zoom .
NOTE
The option of the screen Aspect Ration is different in
different inputs. (For more information, see "Shortcuts
Instructions")
Color Temperature: Change the color temperature. You
can select the color temperature from three options: Cool,
Normal or Warm.
Overscan: Adjusts the picture's reproduction rate. You
can select On or Off.
NOTE
Only available in DTV, Component and HDMI(YUV)
source.
Noise Reduction: Select to reduce the noise level of
connected equipment: off, Low, Medium and High.
Adaptive Contrast: Automatically adjusts picture detail
and brightness. You can select On or Off.
120Hz Effect: Inserts frames to reduce judder in fast
action scenes. You can select On or Off.
NOTE
Only available in the models that support 120 Hz.
Reset Picture Settings - Resets all Picture Settings to the
factory defaults.
9
Standard
50
50
50
0
50
Select Previous Exit
MENU EXIT