Crestron CEN-NVS200 Operations & Installation Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Network Hardware
  5. CEN-NVS200
  6. Operations & installation manual

Crestron CEN-NVS200 Operations & Installation Manual

Network video streamer
Hide thumbs Also See for CEN-NVS200:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual
Crestron CEN-NVS200
Network Video Streamer
Operations & Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CEN-NVS200 and is the answer not in the manual?

Questions and answers

Related Manuals for Crestron CEN-NVS200

Summary of Contents for Crestron CEN-NVS200

  • Page 1 Crestron CEN-NVS200 Network Video Streamer Operations & Installation Guide...

  • Page 2: Regulatory Compliance

    Schneider Electric in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.

  • Page 3: Table Of Contents

    Supplied Hardware ....................13 Installation ......................... 13 Hardware Hookup ..................... 16 User Interface Overview ......................17 Accessing the CEN-NVS200 User Interface ............. 17 Navigating the Home Page ..................20 Configuration ........................... 27 Configuring System Settings ..................28 Configuring Security Settings ................... 30 Configuring Network Settings ...................

  • Page 5: Network Video Streamer: Cen-Nvs200

    CEN-NVS200. When used with a Rava -compatible Crestron touch screen, in addition to receiving interleaved audio from the CEN-NVS200, a “talk back” signal can also be transmitted from the touch screen to the CEN-NVS200. However, performance may vary and may not be suitable for 2-way intercom applications.
  • Page 6 CEN-NVS200. When used with a Rava-compatible Crestron touch screen, in addition to receiving interleaved audio from the CEN-NVS200, a “talk back” signal can also be transmitted from the touch screen to the CEN-NVS200. However, performance may vary and may not be suitable for 2-way intercom applications.

  • Page 7: Security Features

    Additionally, an external sensor can be connected to the CEN-NVS200 via its digital input port. Automated control signals can be triggered in response to any motion, tamper or external sensor event, enabling logging and notification over the network via Crestron touch screens, mobile devices and third-party applications.

  • Page 8: Applications

    Network Video Streamer Crestron CEN-NVS200 Applications The following diagram shows a CEN-NVS200 in a typical application. CEN-NVS200 in a Typical Application 4 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 9: Internal Block Diagram

    Internal Block Diagram The following diagram represents a use model for the digital output and input abilities of the CEN-NVS200. Digital Output and Input of the CEN-NVS200 Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 5...

  • Page 10: Specifications

    Network Video Streamer Crestron CEN-NVS200 Specifications Specifications for the CEN-NVS200 are listed in the following table. CEN-NVS-200 Specifications SPECIFICATION DETAILS Video Input Signal Types NTSC or PAL composite Compression H.264 (MPEG-4 part 10 AVC), MPEG-4 (H.263/MPEG-4 part 2), MJPEG Streaming Up to four simultaneous streams (fourth stream limited to QCIF resolution);...
  • Page 11 Network Video Streamer with PoE Injector Available Accessories CEN-SW-POE-5 5-Port PoE Switch CEN-SWPOE-16 16-Port Managed PoE Switch CEN-SWPOE-24 24-Port Managed PoE Switch PWE-4803RU PoE Injector (Included with model CEN-NVS200-PWE) Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 7...

  • Page 12: Physical Description

    Network Video Streamer Crestron CEN-NVS200 Physical Description This section provides information on the connections, controls and indicators available on the CEN-NVS200. CEN-NVS200 Physical View (Top) CEN-NVS200 Physical View (Bottom) 8 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 13 Crestron CEN-NVS200 Network Video Streamer CEN-NVS200 Overall Dimensions (Top, Front, Side and Bottom Views) 1.36 in (35 mm) 2.96 in (75 mm) 5.40 in (137 mm) Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 9...
  • Page 14 Network Video Streamer Crestron CEN-NVS200 CEN-NVS200 Overall Dimensions (Rear View with Mounting Bracket Attached) 1.25 in (32 mm) 3.95 in (101 mm) Connectors, Controls, and Indicators CONNECTORS, DESCRIPTION CONTROLS, AND INDICATORS LAN PoE (1) 8-pin RJ-45 female; 10BASE-T/100BASE-TX Ethernet port;...
  • Page 15 1. The pin out table indicates signal connections. DC power applied by Ethernet power sourcing equipment (PSE) can connect to either signal pins or N/C pins. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 11...
  • Page 16 Wire ends should be stripped 3/8” (~ 9 mm) and inserted completely. 5. To reset the CEN-NVS200, press and release the recessed HW RESET button with a paper clip or thin object. Wait for the video server to reboot. To restore the CEN-NVS200 to its factory default settings, press and hold the recessed button until the NET and PWR LEDs blink rapidly.

  • Page 17: Setup

    Mounting The CEN-NVS200 can be mounted on a surface, a rack rail or stacked with other equipment. The included mounting bracket must be attached to the CEN-NVS200 before the device is mounted.
  • Page 18 (2022739) Screws (4) #M3 x 5 mm (2022785) Surface Mounting Using four screws (not included), mount the bracket and attached CEN-NVS200 to the surface as shown in the following illustration. CEN-NVS200 Surface Mounting 14 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 19: Rack Mounting

    Network Video Streamer Rack Mounting The CEN-NVS200 can be mounted on a front or rear rail of an equipment rack. Either the left or the right side of the attached mounting bracket can be used to mount the CEN-NVS200 on the rack. (Mounting the right side is shown in the following illustration.)

  • Page 20: Hardware Hookup

    Make the necessary connections as called out in the illustration that follows this paragraph. Apply power after all connections have been made. When making connections to the CEN-NVS200, use Crestron power supplies for Crestron equipment. Hardware Connections for the CEN-NVS200 (Top)

  • Page 21: User Interface Overview

    Accessing the CEN-NVS200 User Interface NOTE: Access to the CEN-NVS200 user interface must be performed from a PC whose IP address is in the same IP subnet. The default configuration of the CEN-NVS200 allows the IP address of the network video streamer to be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server on the local area network.
  • Page 22 Using Crestron ToolBox NOTE: To be able to use Crestron Toolbox to access the CEN-NVS200, the UPnP (Universal Plug and Play) Ethernet protocol configuration setting of the CEN-NVS200 must be enabled. The UPnP protocol is enabled by default. For additional information, refer to “Configuring Network Settings”...
  • Page 23 CEN-NVS200. Refer to “Logging In to the CEN-NVS200” which starts below for log-in information. Logging In to the CEN-NVS200 The user name and password window allows logging in to the CEN-NVS200. User Name and Password Window To log in to the CEN-NVS200: Enter the user name and password.

  • Page 24: Navigating The Home Page

    Network Video Streamer Crestron CEN-NVS200 Navigating the Home Page The home page of the CEN-NVS200 allows access to configuration of the CEN-NVS200, control of basic camera functions and display of streaming video. The following screen illustrates the CEN-NVS200 home page. Graphical buttons, such as PTZ directional buttons, are displayed in the column on the left side.

  • Page 25: Video Window

    Video Window The video window displays MPEG-4 or MJPEG streaming video. For information about configuring video settings, refer to “Configuring Video Settings” which starts on page 47. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 21...
  • Page 26 Video and Audio Control Buttons Video and audio control buttons are described in the following sections. NOTE: When Firefox or Safari is used as the web browser and the CEN-NVS200 is in MPEG-4 or MJPEG streaming mode, video and audio control buttons are not supported.
  • Page 27 Crestron CEN-NVS200 Network Video Streamer NOTE: When Internet Explorer is used as the web browser and the CEN-NVS200 is in MJPEG streaming mode, only the Digital zoom and Record buttons discussed below are supported. Digital Zoom Clicking the Digital zoom button ( ) opens the digital zoom control panel.

  • Page 28: Client Settings

    NOTE: The “Client Settings” page can also be accessed by entering the following URL in the web browser: http://Video Streamer/clientset.html Video Streamer is the host name or IP address of the CEN-NVS200. 24 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 29 NOTE: A minimal view of the video can be accessed at the following URL in the web browser: http://Video Streamer/setup/viewer.html Video Streamer is the host name or IP address of the CEN-NVS200. H.264/MPEG-4 Media Options: (Internet Explorer only) Select the MPEG-4 media for playback: Video and Audio, Video Only or Audio Only.
  • Page 30 Clicking the Configuration link allows configuration of various types of settings, such as system settings, security settings and so on. For additional information, refer to the “Configuration” section which starts on page 27. 26 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 31: Configuration

    Crestron CEN-NVS200 Network Video Streamer Configuration CEN-NVS200 configuration pages allow configuring the following settings: • System settings (refer to “Configuring System Settings” which starts on page 28 for information) • Security settings (refer to “Configuring Security Settings” which starts on page 30 for information) •...

  • Page 32: Configuring System Settings

    URL in the web browser: http://Video Streamer/setup/system.html Video Streamer is the host name or IP address of the CEN-NVS200. 28 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 33 Disable Power and Network LEDs checkbox is deselected; the LEDs are enabled. System Time: Set system time parameters if the CEN-NVS200 is to be used without a Crestron control system: NOTE: System time control settings are not necessary when used with a Crestron control system.

  • Page 34: Configuring Security Settings

    NOTE: The “Security” configuration page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/security.html Video Streamer is the host name or IP address of the CEN-NVS200. Refer to the following sections for security configuration guidelines. 30 • Network Video Streamer: CEN-NVS200...

  • Page 35: Managing User Accounts

    The user name for the administrator is permanently assigned as admin. The default administrator password is blank. Setting an administrator password is optional; however, doing so prevents unauthorized use of the CEN-NVS200 by providing password protection. It is recommended that the Administrator set an administrator password as a matter of prudent security practice.

  • Page 36: Configuring Network Settings

    NOTE: The user name and password are case sensitive. NOTE: Setting a user password is optional; however, doing so prevents unauthorized use of the CEN-NVS200 by providing password protection. In the User Name: text box, enter a user name. In the User Password: text box, enter a password for the user.
  • Page 37 • • RTSP Streaming To configure network settings, click Configuration on the CEN-NVS200 home page and then click Network in the column on the left side of the page. The “Network” configuration page opens. “Network” Configuration Page (Top Half Shown) Operations &...
  • Page 38 Network Video Streamer Crestron CEN-NVS200 “Network” Configuration Page (Bottom Half Shown) 34 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 39 NOTE: The “Network” configuration page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/network.html Video Streamer is the host name or IP address of the CEN-NVS200. Refer to the following sections for network configuration guidelines. Configuring the Network Type Configure the network type in the Network Type pane of the “Network”...
  • Page 40 IP address and related information that is entered manually: IP Address: Enter a unique IP address for the CEN-NVS200. If the device is on a network with a DHCP server, ensure that the IP address is not in the range of IP addresses that the DHCP server assigns.
  • Page 41 NOTE: If the default number of 80 is not used, the port number must be appended to the IP address of the CEN-NVS200 to be able to access the CEN-NVS200 from the web browser. For example, the HTTP port number is set to to 8888, http://192.168.0.100:8888...
  • Page 42 Network Video Streamer Crestron CEN-NVS200 Access name for stream 2: Enter the name to be used by the Crestron MJPEG Viewer application. For example, when using video2.mjpg (default setting), the HTTP command to be entered into the Crestron MJPEG Viewer is the following: /video2.mjpg?user=myuser&pw=secretpassword...
  • Page 43 The default port number is 21. Configuring RTSP Streaming Configure RTSP (Real Time Streaming Protocol) in the RTSP Streaming pane of the “Network” configuration page. “Network” Configuration Page – RTSP Streaming Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 39...
  • Page 44 (default setting), the following URL connects directly to the MPEG-4 video: rtsp://ip address/live.sdp ip address is the IP address of the CEN-NVS200. live.sdp is the default access name. Access name for stream 2: Enter an access name for stream 2 for connections from client software when the codec type of the stream is MPEG-4.

  • Page 45: Configuring Ddns Settings

    Valid values range from 1 to 255. Configuring DDNS Settings NOTE: The current version of the CEN-NVS200 is not compatible with the Crestron DDNS (Dynamic Domain Name Service). Operations & Installation Guide – DOC. 7111E...

  • Page 46: Configuring Client Access Settings

    Configuration of a client access list provides one or more IP address ranges that are allowed to access the CEN-NVS200. Ranges of addresses that are denied access to the CEN-NVS200 can also be configured. Addresses can also be deleted from the allowed or denied list of IP addresses.
  • Page 47 Select the appropriate Rule from the dropdown list. There are three types of rules: Single: This rule allows the user to add an IP address to the Allowed list or Denied list. Filter Address Example - Single Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 43...
  • Page 48 NOTE: Omitting starting and ending IP address entries allows all IP addresses to connect. To delete an entry from the Allowed list or the Denied list, select the entry and click Delete. 44 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 49: Configuring Audio And Video Settings

    NOTE: The “Audio and Video” configuration page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/audiovideo.html Video Streamer is the host name or IP address of the CEN-NVS200. “Audio and Video” Configuration Page (Top Half Shown) Operations & Installation Guide – DOC. 7111E...
  • Page 50 Network Video Streamer Crestron CEN-NVS200 “Audio and Video” Configuration Page (Bottom Half Shown) Refer to the following sections for video and audio configuration guidelines. 46 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 51 From the Modulation drop-down list, select the video input modulation type: NTSC, PAL or Auto. NOTE: The CEN-NVS200 must be rebooted to activate the change. Choose the input from the Select Caching Stream drop down list. Select one or both of the Video Orientation checkboxes: •...
  • Page 52 URL in the web browser: http://Video Streamer/setup/image.html Video Streamer is the host name or IP address of the CEN-NVS200. On the “Image Settings” configuration page, adjust the Brightness, Saturation, Contrast and Sharpness as desired. Values in the drop-down lists range from –5 to NOTE: A value of 0 for Brightness and Contrast auto tunes the video.
  • Page 53 URL in the web browser: http://Video Streamer/setup/privacy.html Video Streamer is the host name or IP address of the CEN-NVS200. Select the Enable privacy mask checkbox to enable privacy mask window(s). A privacy mask window blocks viewing of an area on the video output as determined by the privacy mask window settings.
  • Page 54 Configure video quality settings for Stream 1, Stream 2, Stream 3 and/or Stream 4 in the Video Settings pane of the “Audio and Video” configuration page. Settings “Audio and Video” Configuration Page – Video Quality Settings (Streams 1 and 2 Shown) 50 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 55 Intra frame period: (Applicable to MPEG-4 mode only) From the drop-down list, select the interval in seconds at which full frames are to be transmitted. A larger interval improves performance but takes longer for initial connection. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 51...
  • Page 56 NOTE: Most cell phones support media streaming with GSM-AMR audio. AAC bit rate: If AAC is selected as the audio type, set the AAC bit rate based on available bandwidth. 52 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 57: Configuring Motion Detection Settings

    NOTE: The “Motion detection” configuration page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/motion.html Video Streamer is the host name or IP address of the CEN-NVS200. Select the Enable motion detection checkbox to enable motion detection window(s).
  • Page 58 Motion Detection on Home Page NOTE: If the predefined motion detection is under privacy mask block, the monitoring window is not triggered. 54 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 59: Configuring Camera Tampering Detection Settings

    Configuring Camera Tampering Detection Settings To configure camera tampering detection settings, click Configuration on the CEN-NVS200 home page and then click Camera Tampering Detection in the column on the left side of the page. The “Camera tampering detection” configuration page opens.

  • Page 60: Configuring Camera Control Settings

    URL in the web browser: http://Video Streamer/setup/camera_control.html Video Streamer is the host name or IP address of the CEN-NVS200. Select one of the following radio buttons: Disable: Select Disable if the camera is a fixed camera or does not •...
  • Page 61 Crestron CEN-NVS200 Network Video Streamer (Applicable only when PTZ Camera is selected) From the PTZ Driver: drop-down list, select the desired PTZ driver. The CEN-NVS200 has five built-in PTZ camera drivers: DynaDome/SmartDome, Pelco D, Pelco P, LILIN and Samsung SCC-643.
  • Page 62 In the Dwelling time (sec): text entry box, enter the desired number of seconds, and then click Save in the bottom of the page to save the setting. 58 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 63 NOTE: If Custom camera is selected as the PTZ driver on the “Camera Control” configuration page, pan, tilt, zoom and focus functions must be configured by setting custom commands. “Custom Command” Page (Not Applicable to Custom Camera) Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 59...
  • Page 64 Enter the camera control commands into the text entry boxes. Refer to the camera documentation to set up frequently used functions. Click Save, and then click Close to close the page. 60 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 65: Configuring Homepage Layout Settings

    NOTE: The “Homepage Layout” configuration page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/layout.html Video Streamer is the host name or IP address of the CEN-NVS200. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 61...

  • Page 66: Configuring Event, Server And Media Settings

    Configuring Event, Server and Media Settings To configure event, server and media settings, click Configuration on the CEN-NVS200 home page, then click Events and Servers in the column on the left side of the page. The “Events and Servers” configuration page opens.
  • Page 67 NOTE: The “Events and Servers” configuration page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/application.html Video Streamer is the host name or IP address of the CEN-NVS200. NOTE: It is recommended that server and media settings be configured before event settings are configured.
  • Page 68 Normal or Low. The event with the highest priority is executed first. Enter the number of seconds to wait before detecting the next event (applicable to motion detection and digital input trigger types). 64 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 69 • Camera Tampering Detection, which triggers the event when camera tampering is detected Video Loss, which triggers the event when the CEN-NVS200 does not • receive the video signal from the camera •...
  • Page 70 Up to five servers can be configured. To configure a server: In the Action pane of the “Events and Servers” configuration page, click Add Server. The “Server Settings” page opens. “Server Settings” Page 66 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 71 NOTE: The folder privilege must be open for upload. Passive Mode: Select the checkbox to enable Passive mode transmission. Passive mode allows the flow of data to be set up and initiated by the CEN-NVS200 (FTP client) rather than by the FTP server. HTTP configuration URL: Enter the URL to upload the media.
  • Page 72 User name: Enter the granted user name on the network storage. Password: Enter the granted password on the network storage. Crestron Control System configuration Server address: Enter the domain name or IP address of the Crestron control system. Server port: Enter the port number of the CEN-NVS200 module.
  • Page 73 File name prefix: Enter the prefix to be added to the file name of the snapshot images. Add date and time suffix to file name: Select the checkbox to add time and date information to the file name. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 69...
  • Page 74 To delete media listed in the Media Settings pane, select the media in the drop-down list and click Delete. 70 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...

  • Page 75: Configuring Recording Settings

    NOTE: The “Recording” configuration page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/recording.html Video Streamer is the host name or IP address of the CEN-NVS200. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 71...
  • Page 76 Click Save to save the settings. The recording name, status, weekly schedule, time schedule, source and destination are displayed in the Recording Settings pane of the “Recording” configuration page. 72 • Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E...
  • Page 77 Destination column of the Recording Settings pane. Some or all files can then be deleted as desired. To delete a recording listed in the Recording Settings pane, select the recording in the drop-down list and click Delete. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 73...

  • Page 78: Configuring System Log Settings

    Crestron CEN-NVS200 Configuring System Log Settings The CEN-NVS200 can log system messages on the remote server. The protocol is compliant with RFC 3164. For an external Linux server with syslogd service, use the “r” option to turn on the facility to receive a log from a remote machine.

  • Page 79: Viewing System Parameters

    NOTE: The “Parameter List” page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/parafile.html Video Streamer is the host name or IP address of the CEN-NVS200. “Parameter List” Page Operations & Installation Guide – DOC. 7111E...

  • Page 80: Maintenance

    • Exporting/uploading files • Upgrading firmware To perform maintenance, click Configuration on the CEN-NVS200 home page and then click Maintenance in the column on the left side of the page. The “Maintenance” page opens. “Maintenance” Page 76 • Network Video Streamer: CEN-NVS200...

  • Page 81: Upgrading Firmware

    NOTE: The “Maintenance” page can also be accessed by entering the following URL in the web browser: http://Video Streamer/setup/maintain.html Video Streamer is the host name or IP address of the CEN-NVS200. Refer to the following sections for information about maintenance actions. Rebooting the CEN-NVS200 To reboot the CEN-NVS200, click Reboot below the Reboot pane of the “Maintenance”...

  • Page 82: Uploading And Upgrading

    (such as changing the device ID or creating an IP table) to ensure proper functioning. NOTE: Crestron software and any files on the website are for authorized Crestron dealers and Crestron Service Providers (CSPs) only. New users must register to obtain access to certain areas of the site (including the FTP site).

  • Page 83: Programs And Firmware

    Toolbox. For details on uploading and upgrading, refer to the Crestron Studio help file, SIMPL Windows help file or the Crestron Toolbox help file. If a Crestron Studio (or SIMPL Windows) program is provided, it can be uploaded to Crestron Studio or SIMPL Windows the control system using Crestron Studio (or SIMPL Windows) or Crestron Toolbox.

  • Page 84: Problem Solving

    Network Video Streamer Crestron CEN-NVS200 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CEN-NVS200 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION NET LED does...

  • Page 85: Reference Documents

    Crestron worldwide offices at www.crestron.com/offices. To post a question about Crestron products, log onto Crestron’s Online Help at www.crestron.com/onlinehelp. First-time users must establish a user account to fully benefit from all available features.

  • Page 86: Return And Warranty Policies

    (property or economic damages inclusive) arising from the sale or use of this equipment. Crestron is not liable for any claim made by a third party or made by the purchaser for a third party.
  • Page 87 Crestron CEN-NVS200 Network Video Streamer This page is intentionally left blank. Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200 • 83...
  • Page 88 Crestron Electronics, Inc. Operations & Installation Guide – DOC. 7111E (2030033) 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON 08.14 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

Table of Contents