Setup Mode - Two Notes TORPEDO C.A.B. User Manual

Configuring and using the TORPEDO C.A.B.
• 50Hz, 120Hz, 360Hz, 800Hz, 4000Hz (Bass mode): center frequency of each band, from the
lowest to the highest. You can adjust the gain, measured in dB, of each band.

7 SETUP mode

Button
HOLD TO SAVE/EDIT (toggle)
PRESET/PARAMETER
OUT LEVEL/VALUE
HOLD TO SAVE/EDIT (hold)
To enter the SETUP mode, press and hold the A switch, and press the EDIT button.The SETUP mode
groups all the global parameters of the TORPEDO Live. In this mode, you will have access, for exam-
ple, to the reception of a MIDI command or the syncing of the machine with the TORPEDO Remote.
Parameter
A Sw
A Ho
B Sw
B Ho
MIDI CC
MIDI PC
MIDI CHANNEL
MIDI MONITOR
REMOTE MONITOR
Firmware
Serial
24
Save a preset between 01 and 00 (preset 100)
Value
Short click on A function
Hold A function
Short click on B function
Hold B function
Control Change receive, On or Off
Program Change receive, On or Off
MIDI Channel selection, from 1 to 16 or ALL (the machine listens to all
MIDI channels)
Incoming MIDI command monitoring
• "- -": a command is received on a MIDI channel other than the
one you selected for the machine.
• "In": a command is received on the channel you have selected
for the machine.
• No Connection: no active USB connection
• USB Connected: active USB connection
• Remote connected: active USB connection, sync with the TOR-
PEDO remote
Current firmware version of the TORPEDO C.A.B.
Serial number
Two Notes Audio Engineering
Function
Return to PERFORM mode
Navigate the parameters
Set a parameter value
TORPEDO C.A.B.