Table of Contents
Advertisement
Setting the Temperature Limits
18
E-
MWR-WH02_IB_E_33323-1.indd 18
You can set upper limit/lower limit temperature so that the
desired temperature is not set too high or low.
Press the
button for 3 seconds to enter the setup
1
mode.
The wired remote controller will enter the setup
Result:
mode and the menu will
display .
2
Press the
buttons and select menu .
Each time the
Result:
menu number increases by 1.
Press the
temperature limit setup mode.
3
Set the lower and upper temperature limit by pressing the
buttons.
Note
Set the lower limit first by pressing the
button and set the upper limit.
Each time the
the temperature is increased/decreased
by 1°C(1°F) .
Press the
Press the
temperature limits setup.
Press the
button to complete the temperature limit
4
settings.
The temperature setting will be restricted
Result:
by the set lower/upper temperature limit.
Note
Press the
Press the
button.
5
Menu selection display will end.
Result:
Note
The lower limit can not be same or higher than upper
limit.
Even though you set the lower temperature limit to
16°C(61°F), lower temperature will be set to 18°C(65°F) in
all the modes except in heating mode. When you set the
lower temperature limit to 18°C(65°F), it will be applied
under all the operation modes.
buttons are pressed,
button to enter the
buttons followed by the
buttons are pressed,
button after setting.
button to cancel the
button to cancel the setting.
2011-01-10 오후 1:13:48
Hide quick links:
Advertisement
Table of Contents
