Selecting The Fan Mode - Samsung MWR-WH02 User Manual

Selecting the Fan Mode

Select the fan mode to circulate air without changing the
temperature.
Press the (ON/OFF) button to turn on the indoor unit.
1
- Do not press the
controller is on.
The air conditioner will be turned on with the
Result:
most recently used mode.
The air conditioner has a built-in protection
mechanism to prevent the unit from being damaged
when it is started immediately after being:
 Plugged in
 Stopped
The air conditioner will start up after 3 minutes.
To select the FAN mode, press the
2
displayed on the remote controller.
 The air conditioner will operate in fan mode.
Result:
 You cannot adjust the temperature in fan
mode.
Select the fan speed by pressing the
3
Each time the
Result:
change in the following order:
Low
To adjust the air swing direction, refer to page 13.
4
Note If the indoor unit does not support Fan mode,
and you have pressed the
will be displayed.
MWR-WH02_IB_E_33323-1.indd 9
(ON/OFF) button if the remote
button until Fan is
button.
button is pressed, fan speed will
 Med  High
button, the lamp
9
E-
2011-01-10 오후 1:13:35