Windvd - Panasonic CF-VDRRT2 Operating Instructions Manual

WinDVD

WinDVD is a software application for DVD playback.
Here, you will find explanations and general information on the installation procedure and
how to access the online manual.
Refer to the online manual concerning the detailed use of the software application (
page 22) .
Running WinDVD
E
Windows XP
Select [Start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select
on the desktop.
Windows 2000
Select [Start] - [Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select
on the desktop.
Usage Precautions
Do not enter the standby or hibernation mode, or switch the display by pressing [Fn] +
[F3] while WinDVD is running.
Do not start WinDVD while the hard disk drive indicator is blinking immediately after
the computer was started up.
If you maximize the video display window, you can return to the original window size by
double-clicking over the images.
During video playback, do not perform the following.
• Ejecting the disc
• Using other applications or the Command Prompt
• Changing the settings of the screen properties
While WinDVD is running, the volume setting may return to the volume adjusted with
the WinDVD when you pause, fast-forward, fast-reverse or skip between chapters since
priority is given to the volume adjusted by WinDVD, even if the volume is adjusted
using [Fn] + [F5] / [F6] or the taskbar icon.
Immediately after resuming from a pause, frame dropping may occur depending on the
operating environment or DVD video (images or sounds are disrupted).
If you cannot play the disc contents smoothly, right-click on the WinDVD screen, select
[Setup]-[Video], and confirm that the check mark is added to [Use Hardware Decode
Acceleration] and [Use Hardware Color Acceleration].
The display may flicker, depending on the disc. In this case, delete the check mark for
[Use Hardware Decode Acceleration].
20