Check The Tire Pressure; Complete The Set-Up/Pre-Delivery Form - Honda CBR1000RR2007 Repsol Edition Set-Up Instructions

25. Check the clutch lever and sidestand
ignition cut-off switches (cont.).
Sidestand ignition cut-off switch test:
Shift the transmission into gear.
Lower the sidestand and pull the clutch lever
in. Turn on the ignition, set the engine stop
switch to the RUN position, and press the
starter button.
If the engine starts, there is a problem with
the sidestand ignition cut-off switch.
Troubleshoot the cause.

26. Check the tire pressure.

Front: 36 psi
Rear: 42 psi
27. Complete the Set-up/Pre-delivery
form.
Complete an On-Road Motorcycle Set-up/Pre-
delivery Checklist (Reorder No. S0299.2, also
available on iN) by checking the boxes
confirming the steps were done.
©2006 American Honda Motor Co., Inc. - All Rights Reserved
21