8. Relocate the ignition keys.
Remove the ignition keys and protective tube
from the throttle cables.
Remove the packaging from the keys and
insert one of them into the ignition.
9. Position and secure the clutch lever
assembly.
Loosen the two bolts attaching the clutch
lever assembly.
Align the split between the holder and
the assembly with the punch mark on
the handlebar.
Torque the bolts, starting with the top one.
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft)
©2007 American Honda Motor Co., Inc. – All Rights Reserved
CLUTCH
LEVER
ASSEMBLY
PROTECTIVE TUBE
IGNITION
KEYS
BOLTS
PUNCH MARK
5