Configuration Overview
The following steps are required to configure the Spectralink 8400 handsets to work with the ShoreTel system.
ShoreTel Configuration
This section describes the ShoreTel system configuration to support the Spectralink
8400
handsets. The section
is divided into general system settings and individual user configurations needed to support the Spectralink
8400
handsets.
ShoreTel System Settings - General
The first settings to address within the ShoreTel system are the general system settings. These configurations
include the call control, the switch, and the site settings. If these items have already been configured on the
system, skip this section and go on to the "ShoreTel System Settings – Individual Users" section below.
Call Control Settings
The Call Control Options within ShoreWare® Director may need to be reconfigured. To configure these
settings for the ShoreTel system, log into ShoreWare Director and select "Administration", "Call Control",
and then "Options" (Figure 2).
Figure 2 – Administration Call Control/Options
The "Call Control/Options" screen will then appear (Figure 3).