Table of Contents
Advertisement
Warning for Handling This Product:
• This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care
should be taken that this temperature is not exceeded.
• Select the proper programming mode of the PROM programmer.
Cautions to Be Taken for This Product:
• Do not disassemble or modify this product. Personal injury due to electric shock may occur if this
product is disassembled or modified.
• Use caution when handling this product. Be careful not to apply a mechanical shock such as falling
etc.
• Do not directly touch the connector pins of this product.
• Be careful with the static electricity when handling this product and the MCU.
When Not Using This Product for a Long Time:
(1) Attach the connector pins of this product to the conductive sponge.
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.
(3) Store it in the place where humidity and temperature are low and direct sunshine does not strike.
• Attach this product to the IC socket on the PROM programmer properly.
• Insert the MCU to the IC socket of this product properly.
• When opening and closing the IC socket of this product, be sure to keep it horizontal.
• Be sure to set the programming area as described in this instruction manual.
• Do not use the PROM programmer's device identification code readout function.
WARNING
CAUTION
IMPORTANT
( 5 / 14 )
Advertisement
Table of Contents
