Yx500-Cel Technical Specifications; Yx500-Pcs Technical Specifications - Wireless Extenders zBoost YX500 Series Installation Manual

wpsantennas.com
16
zBoost YX500/510 Series Installation Guide
Power Install Signal
Light Light Light
Flashing Flashing Flashing
AMBER Red RED
or
Flashing
GREEN
For more troubleshooting tips, visit

YX500-CEL Technical Specifications

Frequencies 824 - 896 MHz (CEL only)
Networks: CDMA, GSM, TDMA, AMPS
Total Signal Gain: 56dB (adaptive)
RF Output Power: ½ Watt EiRP (with included antenna)
Base Unit Weight: 12 oz.
Base Unit Size: 5" x 7" x 2"
AC Power Input: 100 – 120 VAC 60Hz
DC Power Output: 5VDC, 2.0A
FCC ID: SO4YX500-CEL
Industry Canada ID: 5544A-YX500CEL
Patents pending

YX500-PCS Technical Specifications

Frequency 1850 - 1900 MHz (PCS only)
Networks: CDMA, GSM, TDMA
Total Signal Gain: 60dB (adaptive)
RF Output Power: ¼ Watt EiRP (with included antenna)
Base Unit Weight: 12 oz.
Base Unit Size: 5" x 7" x 2"
AC Power Input: 100 – 120 VAC 60Hz
DC Power Output: 5 VDC, 2.0A
FCC ID: SO4YX500-PCS
Industry Canada ID: 5544A-YX500PCS
Patents pending
Wi-Ex
Condition
System is receiving signals from either the
cell phone or the cell tower which are too
strong for proper operation. This may be
due to improper installation or operation.
Remove power for 10 seconds and
reconnect power to reset error. If the error
persists, contact Wi-Ex Customer Service
for additional information or installation
assistance.
www.wi-ex.com
(877) 594-5766