Wireless Extenders zBoost YX500 Series Installation Manual page 14

wpsantennas.com
10
zBoost YX500/510 Series Installation Guide
4. Unroll the RG6 coaxial cable supplied with your zBoost Series kit
removing any loops or kinks and attach to the base of the
Signal Antenna.
Figure 4 – Signal Antenna and Mounting Bracket
Note: If you need to adjust the Signal Antenna after
securing it to the bracket, insert a small flat-head
screwdriver on each side of the bracket bridge.
Pushing down on the bridge grips will allow you to
slide the bridge off each tab.
Mounting Signal Antenna to an Attic Top or Main Beam
If a cross-beam is not available, the antenna bracket can be mounted to a
main beam. Secure the bracket near the top of the Signal Antenna instead of
near the base.
Figure 5 - Mounting Signal Antenna to a Main Beam
Wi-Ex
(877) 594-5766