To Set The Starting Time; To Set The Stopping Time; Set The Starting & Stopping Time - Mitsubishi Electric R410A Technical Manual

Wireless Remote Controller
a. To set the STARTING time.
※ Please push the CANCEL button to cancel any former settings.
※ Push the TIMER button. The remote controller will show the TIMER and the signal "h" is shown on the
display panel. The control is now ready to reset the TIMER ON to start the operation.
※ Push the TEMP button (
or
※ After setting the TIMER there will be a one-half second delay before the remote controller transmits the
signal to the Air Conditioner. Then, after approximately another 2 seconds, the set temperature will
re-appear on the digital display.
b. To set the STOPPING time.
※ Please press the CANCEL button to cancel any former settings.
※ Push the TIMER button and the remote controller will show the last set time for the START operation and
the signal "h" will be shown on the display panel. You are now ready to readjust the TIMER OFF to stop the
operation.
※ Push the TEM button to cancel the TIMER ON setting. The digital area will show "00".
※ Push the TIMER button and the remote controller will show the last set time for the STOP operation and the
signal "h" will be shown on the display panel. You are now ready to reset the time of the STOP operation.
※ Push the TEMP button (
or
※ After setting the TIMER there will be a one-half second delay before the remote controller transmits the
signals to the Air Conditioner. Then after approximately another 2 seconds, the set temperature will
re-appear on the digital display.
c. Set the STARTING & STOPPING time
※ Please press the CANCEL button to cancel any former settings.
※ Push the TIMER button and the remote controller will show the last set time for START operation and the
signal "h" will be shown on the display panel. You are now ready to readjust the TIMER ON to start the
operation.
※ Push the TEMP button (
or
※ Push the TIMER button and the remote controller will show the last set time for STOP operation and the
signal "h" will be shown on the display panel. You are now ready to reset the time of the STOP operation.
※ Push the TEMP button (
or
※ After setting the TIMER there will be a one-half second delay before the remote controller transmits the
signal to the Air Conditioner. Then, after approximately another 2 seconds, the set temperature will
re-appear on the digital display.
NOTE:
1. Please reset the TIMER after cancelling the former time settings.
2. The setting time is relative time. That is the time set is based on the delay of the current time.
Warning
1. Be sure there are no barriers between the remote controller and the receiver of indoor unit otherwise the air
conditioner will not work.
2. Keep the Remote Controller away formal liquids.
3. Protect the Remote Controller from high temperatures and exposure to radiation.
4. Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction.
5. Keep controller away from EMI (Electro-Magnetic Interference) supplied by other household appliances.
160
) to set desired unit START time.
) to set the time you want to stop the operation.
) to set the time you want to start the operation.
) to set the time you want to stop the operation.
R410A Tropical Split Type Technical Manual
Control