Programming; Smart Recovery; English/Metric Display; Airflow - Observer TSTAT0101SC Installation Manual

Programming

ON (default) ­ allows program schedule to be set by user.
OFF ­ system becomes non­­programmable

Smart Recovery

This feature applies to programmable operation only. The
control will start recovery 90 minutes prior to schedule
change in both heating and cooling mode. Refer to opera­
tional information for more detail.
On or Off (default = On)

English/Metric Display

ºF or ºC, (default = ºF)

Airflow

Upon a first time start­up of the Observer Control, the fur­
nace DIP switch settings will be copied to the furnace setup
menu. Any changes can then be made from the Observer
Control.
58
616 01 1017 02