Brand Selection
After the commissioning of the Observer Control, the installer
will be prompted to select the appropriate brand. After the
brand selection, or NO LOGO is made, the installer will have
the opportunity to confirm the choice. If the brand selection is
correct, press DONE, otherwise press BACK to select a dif
ferent brand.
Install/Service Menus
Install/Service Menus –
NonCommunicating Mode
The "INSTALLER CONFIGURATION" menus contain vital
information. This information enables the Installer or Service
person to view a summary of what has been installed, etc.
This information is not covered in the Owner's Manual.
To enter INSTALLER CONFIGURATION menus, press and
hold the FAN BUTTON for at least ten seconds. The follow
ing menu will appear: (If an item is grayed out, that item is
not applicable to the equipment configuration selected – for
example, reversing valve will be grayed out if a standard AC
system is selected).
30
616 01 1017 02