Polaroid 37" User Manual page 30

Definition - HD-READY
Your television can receive high-definition signals (HDTV). You can connect the input
sources (HDTV set-top box or HDTV DVD player) to the (HDMI) socket (digital HDTV
signal). This ensures that you can view digital HDTV programs, even if they are copy-
protected (HDCP High-Definition Copy Protection).
9.7-PC connection
Rear view of TV
Picture connection
Sound connection
9.7.1-PC Connection:
Connect the D-Sub15 connector to the PC-IN socket at the back of your television
by using an appropriate cable (not supplied with your television). Again, by using
an appropriate cable, connect the audio output of your PC to the PC AUDIO-IN at
the back of your television to listen to sounds from your PC and you can adjust the
volume level of your source by using VOL+/VOL- buttons.
9.7.2-Transition to the PC mode
For your LCD-TV to switch to the monitor (PC) mode, press the AV button on your
remote control. SOURCE menu will be displayed. Select PC option by pressing the
Up/down movement buttons and press the OK button.
10.7.3-PC Setting
Enter into the Setup menu from the main menu by pressing the MENU button in
the PC mode. In order to make the necessary settings in this menu, you can select
the tabs with the up/down buttons on your remote control to make the following
relevant settings.
9.7.4-AUTOCONFIGURATION
The most suitable geometric settings in accordance with the entry mode are
configured by this function. For this operation, just select the Autoconfiguration
tab and press OK button.
9.7.5-HORIZONTAL POSITION: Horizontal position setting.
9.7.6-VERTICAL POSITION: Vertical position setting.
9.7.7-CLOCK FREQUENCY: This is the pixel clock frequency. User can narrow
I 28
EN