Samsung T220HD Service Manual page 12

Description
12. Remove the two (2) connectors.
Caution : Servicing is not supported for the PCB.
▶Assembly
13. The assembly is in the reverse order of the
disassembly.
14. Connect the disassembled snap and the LED
module again.
15. Fix the connecting wire with filament tape
Caution : If the wire is damaged when closing the
cover, an operating error may occur.
Therefore, make sure to close the
cover after fixing it with filament tape.
※ The assembly is in the reverse order of disassembly.
3. Disassembly and Assembly
Photo
filament tape
Screws
3-5