Table of Contents
Advertisement
Available languages
Available languages
1. Make sure that the appliance is switched off and unplugged
from electrical outlet.
2. Take the pusher (1)
clamps (7)
(7)
(7)
(7) and move aside and down.
(7)
3. Remove the lid (2)
4. Unfasten the pulp container (4)
1. Assembly the appliance (See «Assembly») and plug it in. Before
plugging in make sure that the switch (10)
and that the safety lock (7)
2. Wash the food before processing. You may process the whole
small-size fruits and vegetables (carrots, small apples, toma-
toes). It is necessary to cut large-size fruits and vegetables into
pieces of such a size that they freely pass into the feeder tube (2)
3. Switch on the juice extractor by selecting the required speed
«1»
«1»
«2»
«2»
«1» or «2»
«1»
«1»
«2» with the help of the switch (10)
«2»
operate the juice extractor efficiently, use the first speed when
extracting juice from soft food (for example, tomatoes); and the
second speed is recommended when processing hard food (such
as carrots).
Note: run the juicer for 1 minute at a time only, then
switch it off for a while to get cooled.
4. Lower the fruits or vegetables into the feeder tube (2)
pushing them with the pusher; in so doing the motor should
run. Do not push the food into the juice extractor using excessive
force. This will merely reduce the appliance's efficiency.
5. If in the course of operation the pulp container (4)
switch off the juice extractor, disassemble it and clean the con-
tainer from pulp. Assemble the appliance to continue operation.
6. After you finish, immediately wash the juice extractor and thor-
oughly dry its parts.
CARE AND CLEANING
1. Unplug the juice extractor from the electrical
2. Wipe the appliance body with soft damp cloth.
3. Wash the remaining parts of the juice ex-
tractor in soapy water with a soft sponge. Do not use stiff brushes
and abrasive cleaners. The lid, separating unit, grater/filter,
pulp container are dishwasher-safe.
4. When extracting juice from such food as carrots, etc. the plastic
parts of the juice extractor coming into contact with food may
become stained. To clean the stains, wipe the parts with cloth
moistened with a small amount of vinegar diluted by water –
two or three teaspoonfuls of 9% vinegar per a glass of water –
then wash the parts as usual.
Disassembly
(1)
(1) out of the feeder tube (2)
(1)
(1)
(2)
(2)
(2). Then remove the grater/filter (3)
(2)
(4)
(4). Then the holder (6).
(4)
(4)
Operation
(7)
(7)
(7)
(7) is properly locked.
outlet and disassemble it (see «Disassembly»).
Never immerse the appliance body
Never immerse the appliance body
Never immerse the appliance body
Never immerse the appliance body
Never immerse the appliance body
and power cord in water or any other
and power cord in water or any other
and power cord in water or any other
and power cord in water or any other
and power cord in water or any other
l i q u i d
l i q u i d
l i q u i d . . . . .
l i q u i d
l i q u i d
5 5 5 5 5
(2)
(2). Lift the safety
(2)
(2)
(3)
(3)
(3)
(3).
(6).
(6).
(6).
(6).
(10) is in «0»
(10)
(10)
«0» position
«0»
«0»
(10)
«0»
(10)
(10)
(10)
(10). In order to
(2), carefully
(2)
(2)
(2)
(4)
(4)
(4) becomes full,
(4)
(2).
(2)
(2)
(2)
Advertisement
Table of Contents
