Genlock And Your System - AJA io XT Installation And Operation Manual

Genlock and Your System

Io XT Installation and Operation Manual — Genlock and Your System
Installation Status Messages are Displayed (while installation takes place)
15.Click the Restart button to complete the installation procedure. The system will
perform software restart.
16.Finally, install any AJA plug-ins required for 3rd-party software. These will have to
be downloaded from the AJA website: http://www.aja.com/support/io/io-xt.php
For example, if you wish to use the Io XT with Adobe Premiere or Adobe After
Effects, you would go the AJA website Io XT support page (URL above) and
download the "AJA Mac Plug-ins for Adobe CS5.5" . These plug-ins come with
complete documentation on how to use them.
For video stability and proper system operation, you can genlock all equipment to
house sync, however genlock is not required for Io XT due to excellent freerun
accuracy. To connect genlock, use a black burst generator output looped through the
system. On the Io XT house sync is connected to "LTC/Ref In" .
Note: Be sure to set the Reference/LTC connection to Reference in the AJA Control
Panel
21
1