ipLDK-60 Hardware Description and Installation Manual
BOARD INSTALLATION
4.5.4 Expansion KSU Mounting
NOTE— Do not make any connections between the BKSU and EKSU using link cable until they both have
been properly installed to the Wall Mounting or Rack Mounting as applicable.
4.5.4.1 Wall Mounting
14. It is recommended to install the Expansion system very close in proximity to the Basic System
(within 5cm).
15. Install 3 anchor plugs in the wall using the mounting template included for accurate placement
(Figure 3.3.3.1A). The KSU can be mounted either vertically or horizontally.
16. Insert the included 3 screws to 3 anchor plugs.
17. Hook the Expansion KSU onto the installed screws, making sure that the System slides down
securely (Figure 3.3.3.1B).
FIGURE 3.3.3.1A MOUNTING TEMPLATE
37
Issue 1
JAN, 2007