American DJ Spherion Tri LED User Instructions page 10

Spherion Tri LED
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the MENU button until "SLND" is displayed, press
ENTER. Either "MAST","SL 1" or "SL 2" will be displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to "SL 2", the fixtures will
now have contrast movement to each other.
SHND: SH 0 - SH 7
- Show modes 0-7 (Factory programs).
Show mode can be run with sound activity or without. For
show mode to run without sound activity turn sound activity
off.
1. Press the MENU button until "SHND" is displayed, press
ENTER.
2. "Sh X" will now be displayed, "X" representing a number
between 0-7. Programs 0-7 are factory programs, while "Sh 0"
is random mode. Press the UP or DOWN buttons to find your
desired show and press the ENTER, then press and hold the
MENU button for at least 3 seconds to confirm.
Note: While running a Show, you can change the show instantly
by pressing the UP or DOWN buttons.
PROG
- In this mode you can choose 1 of 7 colors and con-
trol rotation and rotation speed.
1. Press the MENU button until "PROG" is displayed, press
ENTER.
2. "CoLo" will now be displayed, press ENTER. "CoLX" will now be
displayed, "X" representing a number between 1-7. Use the UP
American DJ - www.americandj.com - Spherion Tri LED Instruction Manual Page 10
© ®
System Menu Spherion Tri LED
or DOWN buttons to scroll through the different colors. Once you
have found your desired color press ENTER.
3. Press the UP or DOWN button so that "ROTA" is displayed. In
this setting you can control rotation. Press the ENTER button,
"XXX" will be displayed. "XXX" representing a number between
0-255.
0-9 is no rotation, 10-113 is clockwise rotation fast-slow,
114-141 is no rotation, 142-245 is counter-clockwise rotation
slow-fast, and 248-255 is no rotation.
4. Adjust the rotation as you desire, then press ENTER.
SOUN -
1. Press the MENU button until "SOUN" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to activate sound active mode, or
"OFF" to deactivate sound active mode.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
SENS -
1. Press the MENU button until "SENS" is displayed, press
ENTER.
2. The display will show a number between 0-100. Press the UP
or DOWN buttons to adjust the sound sensitivity. 0 being the
least sensitive and 100 the most sensitive.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
American DJ
©
Sound Active mode.
Sound sensitivity control.
- www.americandj.com - Spherion Tri LED Instruction Manual Page 11
®
System Menu