Promate Pyram User Manual page 8

OPERATING THE SPEAKER IN AUX-IN MODE
If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect
this unit via bluetooth directly, you can still play it on the speaker via an audio
connecting cable.
1.)Plug one end of the 3.5mm audio cable (excluded) into the headphone or line out jack
on your player, plug the other end of cable into the unit AUX-IN jack of the speaker.
2.)Turn on the external audio source and play your device.
3.)Slide the Power ON/OFF switch to ON position to turn on the unit, the operating
mode indicator will light up in Red.
4.)The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
Notes:
1). If you're connected to the Line out Jack of your external device, then you only need
to adjust the volume control of this speaker. If you're connected to the Headphone Jack
of your external device, then you may need to adjust both the volume control of your
external device and the volume control of this unit to find the most desirable volume
setting.
2)Slide the Power ON/OFF selector to OFF position to turn off the unit when you finish
listening.
Don't forget to switch off the power of your external device as well.
3)During AUX mode, if you plug TF card into the unit, the play mode will automatically
change to TF Card playback mode.
7