Data Review For Patient By Operator Id - Abbott Precision XceedPro Operator's Manual

Data Review for Patient by Operator ID

Please refer to the beginning of this Data Review chapter for step-by-step instructions to access the Data Review menu.
Note: The following section illustrates some common settings. Depending on your institution's specific settings,
some screens will display differently or not at all. If the monitor does not display the screens shown, please
refer to Chapter 10, Troubleshooting.
What You See on the Display
5.8 mmol/L
Questions? Refer to Page 10-9 For Technical Support Instructions.
What You Do
1. Press 1 to select Patient by OperID.
2. You can select one of the following options:
Press 1 – Previous
Press 2 – Next
When finished reviewing the data,
you can:
Press Clear to return to the
Data Review menu.
Press Menu to return to the
Menu Mode menu.
Press On/Off to turn off the monitor.
Comments
The monitor shows the result of the
most recent patient test you performed.
The number that appears to the right of
1-Previous and 2-Next on the monitor
indicates the number of tests available for
review. The display also shows:
Patient ID or Name (p: prompt)
Comment Code (Number in box)
Test Type (Glucose)
Date and Time of test
Operator ID (o: prompt)
Note that test date and time alternates with
Operator ID.
Chapter 5: Data Review
5-3 5-3