Installation - AEG SCT81900S0 User Manual

Refrigerator
Hide thumbs Also See for SCT81900S0:
Table of Contents

Advertisement

7. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
7.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class
SN
N
ST
T
7.2 Electrical Connection
CAUTION!
Any electrical work required to
install this appliance should be
carried out by a qualified electri-
cian or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any li-
ability should these safety meas-
ures not be observed.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
1
5
The wires in the mains lead are
coloured in accordance with the
following code:
1
Green and Yellow:
3
Brown:
5
Blue:
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings iden-
tifying the terminals in your plug, pro-
ceed as follows:
1.
Connect the wire coloured green
and yellow to the terminal marked
either with the letter "E" or by the
earth symbol
and yellow.
2.
Connect the wire coloured blue to
the terminal either marked with the
letter "N" or coloured black.
3.
Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4.
Check that no cut, or stray strands of
wire is present and the cord clamp
4
is secure over the outer sheath.
5.
Make sure the electricity supply volt-
age is the same as that indicated on
the appliance rating plate.
ENGLISH
15
2
3
4
Earth
Live
Neutral
or coloured green

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sct71900s0

Table of Contents