Table of Contents
Advertisement
Power Supply Connection
The power supply uses a nominal 110 or 220 volt circuit. The power supply manages
and conditions the power input to the charger. The power supply does not use a reset-
table or replaceable fuse. If a power surge occurs the power supply temporarily inter-
rupts the current supply until the condition is corrected. If the power light on the pow-
er supply fails to light, an extreme surge may have occurred and the power supply may
trigger an internal fuse that must be serviced by the manufacturer. Return the power
supply for repair or replacement immediately.
Never alter an AC cord or its plug. If it does not fit into your outlet, have a proper
outlet installed by a qualified electrician. An improper connection can cause an
electric shock. To reduce the risk of electric shock, the charger must be grounded.
Before using an adapter, ensure that the outlet box is grounded. If you are not
sure the box is grounded, have it checked and repaired, if necessary, by a qualified
electrician.
A temporary adapter can be used to connect the grounding plug to a properly
grounded two-prong outlet. A 110-volt adapter is shown below. Connect the ground-
ing plug on the adapter to the outlet box using the cover plate screw. Use the tempo-
rary adapter only until a properly grounded, three-prong outlet can be installed by a
qualified electrician.
Grounding Pin
WARNING
WARNING
Cover of Grounded
Outlet Box
Adapter
Metal Screw
www.huskietools.com • Huskie Tools
7
Advertisement
Table of Contents
