Table of Contents
Advertisement
Introduction
The Tri-Chemistry battery charging system is designed to charge or condition multiple
battery chemistries and configurations. This includes Nickel-Cadmium (NiCd), Nickel-
Metal Hydride (NiMH) and Lithium-Ion (Li-Ion) battery packs. The charger can be used
with either 110V AC or 220V AC (CH-90) power supply.
Features
• Accommodates Ni-Cd, Ni-MH, and Li-Ion.
• Condition feature for Nickel-based products
• Charge control inside each charger.
• Power supply: Single Unit Charger: 24V @ 2.5 Amp International switching power
supply.
• Charge termination methods:
Ni-Cd / Ni-MH:
Delta temperature
Negative Delta V
Maximum voltage
Timeout
Maximum temperature
Li-Ion:
Minimum current
Timeout
• Agency approvals: UL/CUL
• Fault indicators for open or shorted cells and temperature faults.
• More control for next generation products.
Power supply:
POWERTRON ELECTRONICS CORP (E248122), model PA1060-
240T1A250, input rated 100-240 Vac, 50/60 Hz, 1.8A; output rated 24 Vdc, 2.5A, 60W max.
Batteries:
Huskie batteries of Ni-Cd rated Maximum 14.4V dc, 1.9 Ah, Ni-MH rated
Maximum 14.4V dc, 2.9 Ah and Li-Ion rated Maximum 14.4V, 3Ah.
4
Huskie Tools • 1-800-860-6170
Advertisement
Table of Contents
