Related Manuals for Huskie Tools CH-90
Summary of Contents for Huskie Tools CH-90
- Page 1 Product Guide CH-90/CH-90DC Tri-Chemistry Battery Charger www.huskietools.com 800-860-6170 www.huskietools.com • Huskie Tools...
- Page 2 NOTE: BP-80 REQUIRES CH-90 to charge. CH-90 is able to BP-80 CH-90 charge all previous Huskie batteries. The BP-80, Lithium Ion Battery, should be charged before use. Huskie Tools • 1-800-860-6170...
-
Page 3: Table Of Contents
Parts ....................6 Power Supply Connection ............7 Operating Temperature Range ..........8 Battery Charger Operating Instructions ........9 Charging the Battery ..............9 Conditioning the Battery ............10 Battery Rejection ..............10 Troubleshooting ............... 11 Warranty and Support ............12 & 13 www.huskietools.com • Huskie Tools... -
Page 4: Introduction
The Tri-Chemistry battery charging system is designed to charge or condition multiple battery chemistries and configurations. This includes Nickel-Cadmium (NiCd), Nickel- Metal Hydride (NiMH) and Lithium-Ion (Li-Ion) battery packs. The charger can be used with either 110V AC or 220V AC (CH-90) power supply. Features • Accommodates Ni-Cd, Ni-MH, and Li-Ion. -
Page 5: About This Guide
• To reduce risk of electric shock, unplug the charger from the outlet before cleaning or changing adapters. • Dispose of used batteries in accordance with local hazardous material laws. • Do not disassemble, incinerate, modify or short circuit batteries, charger or related components. www.huskietools.com • Huskie Tools... -
Page 6: Parts
Parts CH-90/CH-90DC 1. Single Unit Charger 2. AC Power Cord with Power Supply *Available in 110V or 220V AC Huskie Tools • 1-800-860-6170... -
Page 7: Power Supply Connection
Use the tempo- rary adapter only until a properly grounded, three-prong outlet can be installed by a qualified electrician. Adapter Grounding Pin Metal Screw Cover of Grounded Outlet Box www.huskietools.com • Huskie Tools... -
Page 8: Operating Temperature Range
This also applies to the temperature of the battery itself. Allow batteries to adjust to room temperature before charging. Huskie Tools • 1-800-860-6170... -
Page 9: Battery Charger Operating Instructions
A charged battery may be stored in the charger indefinitely. Upon completion of the charging cycle of the Nickel-based battery, the charger switches to “Maintenance Mode” where it maintains the battery at 100% of its rated capacity. This will not damage your battery. www.huskietools.com • Huskie Tools... -
Page 10: Conditioning The Battery
Representative or Customer Service for replacement information. See Troubleshooting table on page 12 for actions to be taken. If the rejected indicator continues to flash the battery should be removed and disposed of in accordance with local regulations. Huskie Tools • 1-800-860-6170... -
Page 11: Troubleshooting
(Li-Ion does not condition) Faulty LED. Send in for repair. Battery becomes hot Defective battery. Immediately remove battery from charger and replace. Power supply shuts down Power line surge. Power will automatically reset. temporarily. www.huskietools.com • Huskie Tools... -
Page 12: Warranty And Support
Huskie Tools, Inc. Warranty Policy Huskie tools carry a warranty that makes us a leader in the tool industry. No other manufacturer dares to back its tools as we do. year All Huskie REC-SERIES battery operated products carry a 5 year warranty. The ECO-SERIES battery operated products carry a 3 year d on warranty. - Page 13 HOW TO GET SERVICE UNDER THE TERMS OF THE LIMITED WARRANTY Return your product directly to Huskie Tools, Inc. as our representative network is not prepared to service the product under the terms of this warranty. 1. Write, call or fax Huskie stating the tool’s purchase date and problem. You will be given a RGA # to assure that your merchandise will be properly handled upon its receipt.
- Page 14 198 N. Brandon Dr. Glendale Heights, IL 60139 www.huskietools.com 800-860-6170 Huskie Tools • 1-800-860-6170...