Table of Contents
Advertisement
Using OEM board monitor for menu navigation and
control
The following instructions refer to controls described in section "Using
Board Monitor Display to Control TV functions" on page 6. Mind that the
names by which we refer to them differ from what appears on your
board monitor, so please use the above mentioned picture to guide
your through the following steps.
Press Menu to enter and Exit to exit the menu
•
Navigate by using left/right arrows
•
Select desired submenu by pressing rotary button
•
Navigate submenu by means of rotary button
•
Once you get to desired option, change value by pressing left/right
•
arrows
The following apply to USB Multimedia submenu only:
General controls:
Hierarchical folder structure. Press rotary button to view folder
•
contents.
Once you get to the desired file, select it by pressing rotary button
•
By default, audio/video file plays in preview mode. For full-screen
•
mode, press Fav/Red.
When viewing self recorded video streams, press Pause/Blue to pause
•
Start/Stop Recording:
Press Record Tv and recording starts.
•
While recording a channel, you can switch to watching programs,
•
provided they are from the same transponder
If you try to navigate outside current transponder, you will not be
•
allowed to continue navigation (Screen goes black and the text
'Recording' is displayed). Navigate back to previous channels.
End recording by first navigating back to the program you are
•
recording and then pressing Exit. The recording will then be saved to
on your USB stick.
Delete recording:
9
Advertisement
Table of Contents
