Table of Contents
Advertisement
IPSec Security Method
User Name
Password
Remote Network IP
Remote Network Mask
After finishing the configuration, please click Next. The confirmation page will be shown
as follows. If there is no problem, you can click one of the radio buttons listed on the
page and click Finish to execute the next action.
Go to the VPN Connection Click this radio button to access VPN and Remote
You have to configure one certificate at least previously
in Certificate Management >> Local Certificate.
Otherwise, the setting you choose here will not be
effective.
Peer ID – Choose one of the ID from the drop down list.
Local ID – Choose Alternative Subject Name First or
Subject Name First.
Medium - Authentication Header (AH) means data will
be authenticated, but not be encrypted. By default, this
option is active.
High - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You
may select encryption algorithm from Data Encryption
Standard (DES), Triple DES (3DES), and AES.
This field is used to authenticate for connection when
you select PPTP or L2TP with or without IPSec policy
above.
This field is used to authenticate for connection when
you select PPTP or L2TP with or without IPSec policy
above.
Please type one LAN IP address (according to the real
location of the remote host) for building VPN
connection.
Please type the network mask (according to the real
location of the remote host) for building VPN
connection.
195
Vigor3200 Series User's Guide
Advertisement
Table of Contents
