Digital Communicator
2.7
Digital Communicator
Two independent telephone lines can be connected to the control panel. Telephone line control/command is made
possible via double line seizure as well as usage of an RJ31X style interconnection. The control panel's digital com-
municator is built into the main circuit board. Connection and wiring of two phone lines is required as shown below.
Note that it is critical that the digital communicator be located as the first device on the incoming telephone circuit to
properly function.
Wiring Phone Jacks
FIGURE 2-9:
27
Document #50066
Rev. D2
12/03/02
P/N 50066:D2