Table of Contents
Advertisement
5
Do you want to display the cluster status?
Note: The cluster-status screen presentation
will show 64 boxes that represent the
stations in the cluster that have their Power
switch set to On and are connected to the
cluster bus.
TESTING - CLUSTER ADAPTER X
THE STATION ADDRESS IS XX
REMOTE IPLIS NOT SElECTED
DO YOU WANT TO DISPLAY THE
CLUSTER STATUS (YIN)?
YES -
Set the Power switch on all cluster
system units (and expansion units, if
installed) to On,
press
g
then
§.
then go to
the next step.
NO - Your system has successfully completed
this test. Remove the terminating plug
and attach the coaxial cable to the
Cluster Adapter connector.
Press
g .
then
~
and continue
with the next Test.
April 1984
Test 2200-5
Advertisement
Table of Contents
