Table of Contents
Advertisement
3.2.1 Keyboard Wedge Interface
A. Turn off the host device.
B. Connect the 10-pin RJ45 male connector
into the 10-pin modular jack on the
bottom of the cradle.
C. Disconnect the keyboard from host.
D. Connect the "Y" ends of the
communication cable to the keyboard and
keyboard port on the host device. If
necessary, use the male/female adapter
cable supplied with the scanner for the
proper connections.
E. Plug the external power supply into the
power jack on the bottom of the cradle.
F. Plug the power supply into the AC outlet.
The red LED on the rear of the cradle will
stay on.
G. Turn on the host device.
H. Establish communication between the
scanner and cradle.
6
Hide quick links:
Advertisement
Table of Contents
