Quick Start; Standard Shipment Package; Start Up - BT SG300 Quick Manual

2. Quick Start

2.1 Standard Shipment Package

The standard shipment package is provided with the
following items.
- SG300BT Handheld Bar code Scanner
- Cradle or Charger
- Power Adaptor (if applied)
- Communication Cable
- Skip resistant pad
- Iron panel of cradle and screw
- Quick Start Guide
Visually inspect the device and accessories for any
evidence of physical damage. If anything is missing
or appears to be damaged, immediately contact your
dealer.

2.2 Start Up

Connect the communication cable provided to your
POS or Host system and cradle. Power on the
cradle with the provided power supply and scan the
Bluetooth MAC address code located on the bottom
of cradle.
After approximately five seconds your connection is
operational and the blue LED on the cradle is on.,
The scanner with Bluetooth must be charged for a
minimum of 4.5 hours before it can be used. If the
battery is full, the red light will be off.
2