Installation; Environment Requirement; Cradle Installation To The Host Device - BT SG300 Quick Manual

3. Installation

This device is very user friendly to be connected
to your POS or Host system trough a RS232,
Keyboard or USB cable.
To read barcode, you simply press the trigger
button and aim the beam to the barcode. You
will hear one beep and the green LED indicator
will light on after scan successfully.
The configuration is very easy also you can
setup the device by scanning all necessary
programming codes from programming menu at
a time to change the settings permanently. And
all settings can be disabled after scan reset to
factory default.

Environment Requirement

3.1
Operation System: Win 98 / 2000 / XP / Vista
Hardware Interface: RS232, KBW, USB II
Power Supply: 5V DC
Cradle Installation to the Host
3.2
Device
Once you have unpacked all components, you
can start installing the device into different steps.
4