Dometic RM3762 Installation Manual page 8

To install the door panel, follow these steps:
1. Remove the decoration strip by inserting a finger in
the plastic profile and pull.
2. Open the door 90 degrees.
3. Insert the door panel's edges into the grooves of the
door frame. Push the panel sideways until the edge
of the panel is fitted into the opposite side groove.
4. Snap on the decoration strip.
MOUNTING INSTRUCTIONS
- 8 -
5. Snap on the handle.
To replace a mounted door panel, follow these steps:
1. Detach the handle by using a flat blade screwdriver
to gently push the two tabs away.
2. Remove the decoration strip, according to the previ-
ous instruction "To install the door panel", step 1.
3. Remove the door panel.
4. Install the new panel according to the previous in-
struction "To install the door panel", steps 3-5.
1
2