CHAPTER 4
Computer Setup
The gPC3 is easy to setup and configure. After removing the
system from its shipping box, please follow the steps below.
Setting up the AC Input voltage selection
The AC Input Voltage Selection can be found at the back of your
computer. There are two settings (115V or 230V) for the system
to operate. Please set the AC input voltage to 115V (The default
is 115V. for the USA)
Warning:
1. Turn off your computer before setting up your computer.
2. Do not remove the protective label to change AC Input
Voltage.
EVEREX gPC3 USER'S MANUAL
9