Table of Contents
Advertisement
Chapter 4
Computer Setup
IMPACT is easy to be set up. After remove the IMPACT from shipping
box, please follow the steps below to finish its setup.
Setting up the AC Input voltage selection
The AC Input Voltage Selection can be found at the back of your
computer. There are two settings (115V or 230V) for the system to
operate. Please set the AC input voltage to 115V (The default is 115V.)
Warning:
1. Please must turn off your computer before setting up your
computer.
2. Do not remove the protective label to change AC Input Voltage, or
it will damage your computer seriously.
IMPACT PC USER'S MANUAL
9
Advertisement
Table of Contents
