Table of Contents
Advertisement
4. Fax
4.10 Junk fax prohibitor
(preventing fax reception
from undesired callers)
If you subscribe to Caller ID service, this feature
prevents fax reception from calls that do not
show caller information.
Additionally, faxes originating from numbers that
match a programmable junk fax prohibitor list will
not be accepted by the fax machine (page 34).
Important:
L This feature does not work when:
– the unit is set to the TEL mode, or
– manual reception is performed.
4.10.1 Activating the junk fax
prohibitor
{<}{>}{A}{B}
{CALLER ID SEARCH}
1
Press {JUNK FAX PROHIBITOR}.
2
Press {>}.
3
Press {A} or {B} repeatedly to select "ON".
4
Press {SET}.
5
Press {STOP} to exit the program.
Note:
L While the junk fax prohibitor is activated, the
JUNK FAX PROHIBITOR indicator is ON.
4.10.2 Programming undesired
callers
You can register up to 10 undesired numbers
from the Caller ID list (page 24) if you do not wish
to receive faxes from them.
34
LIGHT
JUNK FAX
PROHIBITOR
{SET}
{STOP}
1
Press {CALLER ID SEARCH}.
2
Press {A} or {B} repeatedly to display the
entry you wish to prevent the fax reception
from.
3
Press {JUNK FAX PROHIBITOR}.
4
Press {SET}.
L To program other entries, repeat steps 2
to 4.
5
Press {STOP} to exit the program.
Note:
L If there is no space to store new entries,
"LIST FULL" is displayed in step 4. Erase
unnecessary entries.
To display the junk fax prohibitor list
1. Press {JUNK FAX PROHIBITOR}.
2. Press {>} repeatedly to display "JUNK LIST
DISP.".
3. Press {SET}.
4. Press {A} or {B} to display the entry.
5. To stop viewing, press {STOP}.
6. To exit the list, press {STOP}.
To print the junk fax prohibitor list
1. Press {JUNK FAX PROHIBITOR}.
2. Press {>} repeatedly to display "JUNK LIST
PRINT".
3. Press {SET}.
4. Press {STOP} to exit the list.
To erase an entry from the junk fax
prohibitor list
1. Press {JUNK FAX PROHIBITOR}.
2. Press {>} repeatedly to display "JUNK LIST
DISP.".
3. Press {SET}.
4. Press {A} or {B} repeatedly to display the
desired entry.
5. Press {<}.
L To cancel erasing, press {STOP}.
6. Press {SET}.
L The entry is erased.
7. Press {STOP} 2 times.
Advertisement
Table of Contents
