Connecting Power To The Junction Box - Graco 243348 Instructions-Parts List Manual

Connecting to the Junction Box
Refer to Robot Manufacturer's supplied Control and
System Instructions for connecting power to the junc-
tion box. All power to the junction box is provided by
multi wired cables with matching pin connectors that
connect to mating connector that is attached to the
junction box (see connector information on page 24).
WARNING
ELECTRIC SHOCK HAZARD
Do not connect the junction box panel to
a power source unless you are a trained
electrician. Failure to follow standard
procedures or to observe the necessary precau-
tions could result in serious bodily injury or equip-
ment damage.
CAUTION
If power and grounding connections are not done
properly, the equipment may be damaged and the
warranty will be voided.
Installation
injury. Have only qualified electricians access the
control assembly.
WARNING
ELECTROCUTION HAZARD
Installing and servicing this equipment
requires access to parts which could
cause an electric shock or other serious
309280 9