Controlling The Digital Receiver; Front Panel - Topfield CBC-5200 User Manual

2 Introduction

1.2 Controlling the digital receiver

1.2.1 Front panel

• Can view information about the current television or ra-
dio programme.
• Has an electronic programme guide that provides an
overview of scheduled programmes.
You can operate the digital receiver with the remote control or
the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall
socket, we say that it is in standby mode; on the other hand,
when it is on, it is in active mode. Even when you are not
using the digital receiver, you should keep it plugged into
a wall socket to be in standby mode so that it can run timer
events at any time.
button switches the digital receiver between standby mode
and active mode.
STANDBY light lights up while the digital receiver is in standby
mode.
light blinks every time you press a button on the remote
control.
? =
CHANNEL ,
vice. They are also used to navigate in menus and inter-
active screens.
buttons switch to the previous or next ser-