Table of Contents
Advertisement
7.3 Over the air
5. Turn on the target digital receiver to start the firmware
transfer.
6. A progress bar appears showing the progress of the
firmware transfer.
7. Restart the target digital receiver when the firmware
transfer is complete.
It is possible to update the firmware to the latest version over
the air. If a new version is available at any time, then a mes-
sage box pops up, asking you whether to start firmware up-
date. With the choice of Yes, you will be moved to the Sys-
tem Software Upgrade menu, and the firmware update will be
started.
1. Turn off the target digital receiver.
2. Plug one end of an RS-232 cable (9 pin
D-sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.
3. Turn on the source digital receiver if not
already on.
4. Select the
Firmware to Other IRD menu, then
you get asked for confirmation; select
Yes.
7.3 Over the air 41
Installation > Transfer
Advertisement
Table of Contents
