Table of Contents
Advertisement
4.2.5 Audio mode
4.3 Local time setting
ently depending on the setting of the VCR SCART Type op-
tion. If the option is set to Standard, the digital receiver will
pass along the video from the video device to your television
when it starts playback. But if the option is set to External A/V,
the digital receiver will not pass the video automatically. You
have to press the
NOTE
When the digital receiver is in standby mode, the digital re-
ceiver cannot pass the video from the video device to the
television when it starts playback.
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See §5.2.4 for a detailed description.
You should set your local time for timer events.
4.3 Local time setting 21
button to pass it along.
Select the
Time Setting menu. You should
see a screen like the left figure.
You can set the clock manually
or use the time signal, Green-
wich Mean Time (GMT), carried
as part of the digital television
broadcast.
Mean Time, take the following
steps:
System Setting >
To use Greenwich
Advertisement
Table of Contents
