Advertisement
Changing Nozzle
The TR50 sprinkler comes with
eight additional nozzle sizes from
1 to 9 GPM (4.5 to 41 LPM). To
change the nozzle, use the blade
end of the sprinkler tool or a
screwdriver to turn the nozzle
screw out until it clears the nozzle.
Pry the nozzle out at the bottom
and install the new nozzle. Return
the nozzle screw to its previous
position.
Adjusting Spray
Turn the nozzle screw in to diffuse and
shorten the spray radius.
Check Valve
To eliminate check valve
function, install the check
valve disk in position B.
© 200$ The Toro Company, Irrigation Division • An ISO 9000-certified Company • www.toro.com
102-1303
102-2802
Cleaning Screen
Remove and
flush screen
as needed.
To maintain left
stop, align riser
with body as
shown when
reassembling.
Form Number 373-0308 Rev. B
Advertisement
