Sensor Test - Toshiba Satellite E200 Maintenance Manual

3.2 Quick Start
attribute's value in the 2
continue editing the next attribute.
During the editing, user could press F2 to confirm the DMI attribute update or press F4
to ignore the modification. Press ESC to exit the program of DMI Write.
The confirmation screen is as below:
The attributes that have been modified would be marked in red; otherwise in yellow.
User could press F2 to save the changes, or press F4 to ignore and exit the current
program.
3.2.9 3D Sensor Test
In 3D Sensor test, the system checks whether the HDD protection is normal. This
program judges by sampling five kinds of data shown below.
No Item
1 Access
platform.
2 Test
Fixture
Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Maintenance Manual
nd
line and press Enter to confirm the current edition and
Contents
An access platform is leveling.
The Fixture which fixes PC by 90 degree inclination is used.
Vibration/shock doesn't take a PCB at the time of T&D inspection.
3 Diagnostic Programs
11