Toshiba Satellite M300 Maintenance Manual page 113

Replacement Procedures
Install a HDD
The following describes the procedure of installing a HDD (See Figure 4-3 to 4-4).
1. Install a HDD to the HDD Adapt and secure it with the following screws.
• M2.5×4.0B
2. Install a HDD to the HDD holder and secure it with the following screws.
• M2.5×4.0B
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD holder.
3. Insert the HDD assembly into the HDD slot and connect it carefully to the CN19 on the
system board.
4. Secure the HDD assembly with the following screw.
• M2.5×4.0B
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
4-16
x2
x4
x2